Laserfiche WebLink
-2- <br />June 12, 2014 <br />3. DRM : BRL provided additional certification pages as requested, however the <br />certification page for all of Volume XI (first page, currently dated October <br />2006) will also need to updated. <br />B W2: Please see revised Volume XI certification. <br />4. Response accepted <br />5. Response accepted <br />6. DRM : BRL made the requested edits. Additionally, BRL revised the Flow Depth <br />and Velocity for Ditch E -1 on page EXH -8 -12, but not the Flow (cfs) or Ditch Grade. <br />The revised values are inconsistent with the currently approved design information, and <br />are not reflected on revised page 8 -29i. Please provide additionalinformationfor <br />the proposed revisions to depth and velocity and revise page 8 -29i to be <br />consistent with page EXH -8 -12, or restore the original values from the <br />previously approved design, <br />BOW2: Please see revised page EXH -8 -12. The values for ditch E -1 were revised back <br />to the previous values. <br />7. BRL revised the reference and flow value on the table on page Exh- 8 -29iii as <br />requested, but the newly revised page EXH -8 -31 indicates a minimum culvert size of <br />42" for Culvert H1. The design information on page EXH -8 -168 indicates that a 30" <br />pipe will be required, and BRL indicated in their response letter that a 42" pipe would <br />be used. Please update the minimum size indicated on the table on page EXH - <br />8 -31 consistent with the design on page EXH -8 -168 and include a note that <br />the 42 "culvert will be installed. <br />B W2: Please see revised Page Exh. 8 -31 <br />8. Response accepted. <br />9. Response accepted. <br />10. Response accepted. <br />