2014-04-21_HYDROLOGY - M1977348 - Laserfiche WebLink

Home Browse Search

ADZ Laboratories, Inc. 2773 Downhill Drive Steamboat Springs, CO 80487 (800) 334 -5493 Golder Associates ACZ Project ID: L16930 ACZ ID WORKNUM PARAMETER METHOD QUAL DESCRIPTION L16930 -01 WG359741 Barium, dissolved M200.7 ICP M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level. The recovery of the associated control sample (LCS or LFB) was acceptable. WG359985 Chloride M300.0 - Ion Chromatography DC Sample required dilution. Non - target analyte exceeded calibration range. M300.0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). L16930 -02 WG359741 Barium, dissolved M200.7 ICP M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level. The recovery of the associated control sample (LCS or LFB) was acceptable. WG359985 Chloride M300.0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). Sulfate M300.0 - Ion Chromatography DC Sample required dilution. Non - target analyte exceeded calibration range. L16930 -03 WG359741 Barium, dissolved M200.7 ICP M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level. The recovery of the associated control sample (LCS or LFB) was acceptable. WG359985 Chloride M300.0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). Sulfate M300.0 - Ion Chromatography DC Sample required dilution. Non - target analyte exceeded calibration range. L16930 -04 WG359798 Copper, dissolved M200.7 ICP D1 Sample required dilution due to matrix. Manganese, dissolved M200.7 ICP D1 Sample required dilution due to matrix. Zinc, dissolved M200.7 ICP D1 Sample required dilution due to matrix. WG359985 Chloride M300.0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). WG359968 Residue, Filterable (TDS) @180C SM2540C H2 Initial analysis within holding time. Reanalysis for the required dilution was past holding time. WG359985 Sulfate M300.0 - Ion Chromatography DC Sample required dilution. Non - target analyte exceeded calibration range. L16930 -05 WG359741 Barium, dissolved M200.7 ICP M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level. The recovery of the associated control sample (LCS or LFB) was acceptable. Sodium, dissolved M200.7 ICP BB Target analyte detected in calibration blank at or above acceptance limit. Sample value was > 10X the concentration in the calibration blank. M200.7 ICP M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level. The recovery of the associated control sample (LCS or LFB) was acceptable. WG359985 Chloride M300.0 - Ion Chromatography DC Sample required dilution. Non - target analyte exceeded calibration range. M300.0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). REPAD.15.06.05.01 L16930- 1403041518 Page 18 of 23