2014-02-07_REPORT - M1980244 ‎(8)‎

• Permit No: M1980244
• IBM Index Class Name: Report
• Doc Date: 2/7/2014
• Doc Name: Final Report QA Monitoring and testing volume 2 of 2 document 1 of 3Mill Site Earth works
• From: CC&V
• To: DRMS
• Email Name: TC1
• Media Type: D
• Archive: No

ameO
C. Storage and Protection
1. MANAGER will provide area for on-site storage of the geogrid rolls from time of delivery
until installation.
2. The storage and handling of the materials is the responsibility of CONTRACTOR from the
time the materials are manufactured until the time the completed installation is accepted.
CONTRACTOR is responsible for preparing the storage location and for the protection of
the materials from the elements(e.g.ultraviolet light,moisture,temperature,etc.).
3. After CONTRACTOR has removed material from storage,CONTRACTOR shall protect
geogrid from puncture, dirt, grease, water, moisture, mud, mechanical abrasion, excessive
heat,and other sources of damage.
4. CONTRACTOR shall preserve integrity and readability of the geogrid roll labels, and
store the rolls such that MANAGER and CERTIFYING ENGINEER have access to the
package slips or roll labels for each roll to verify roll acceptance.
5. The rolls shall be stored on a prepared surface (not wooden pallets) and should not be
stacked more than two rolls high.
Section 02776.1 Page 3 of 6 May 9,2012
Geognd Revision 1