Laserfiche WebLink
rw I TIM, <br />CRIPPLE CREEL{ & VICTOR GOLD MINING Co. <br />Squaw Gulch (VLF), HWY 67 Realignment Field Monitoring Summary Weekly Report <br />Owner: Cripple Creek & Victor Gold Mining Co. Project Number: Date <br />Project: Squaw Gulch (VLF), Hwy 67 Realignment <br />74201125N0. * * * *. * * ** 10.05.2013 <br />Location: Cripple Creek & Victor Gold Mine, Colorado <br />Contractor: Ames Construction Co. Inc. <br />Reporting Period: 09.29.13 thru 10.05.13 <br />Days <br />S <br />M <br />T <br />W <br />T <br />F <br />S <br />Work Shifts <br />D <br />D <br />D <br />D <br />D <br />D <br />D <br />- <br />N <br />N <br />N <br />N <br />N <br />N <br />D = Day Shift N = Night Shift <br />w = Weather Day <br />Ambient Temperature Ranges for reporting period: Weather conditions for reporting period: <br />Low: 25 °F — 407 Cloud Cover: Partly Cloudy / Cloudy <br />High: 48 °F — 67 °F Precipitation: None <br />Wind: Cahn to Gusts at times <br />Ames: Continuing construction tasks for HWY 67 and VLF. <br />Planning: Continuing Constniction activities and scheduling for VLF and HWY 67. <br />CONSTRUCTION ACTIVITIES and PROGRESS: <br />I) Earthworks <br />A) VLF (Phase 1) <br />Topsoil / Overburden Stripping: During this reporting period, topsoil materials were observed being hauled to <br />area 34 stockpile from Bench "DD" east of the existing crib wall and Bench "C" Sta. C8+00. <br />Production drilling: Occurred during this reporting period within the planned VLF limits. <br />Three production blasts' occurred during this reporting period within planned VLF limits. <br />Structural Fill: The contractor continued fill operations and compaction by method specification for the ADR haul <br />road and planned VLF 2:1 slope near "C" bench. <br />Structural fill materials were placed and compacted for the ADR haul road. A Cat D8T was used to spread the loose <br />lifts and compaction was achieved utilizing a Cat 563 smooth drum roller by method specification. <br />Structural fill materials were placed from 2:1 cut then compacted near "C" bench close to midway. Materials used as <br />fill were placed in 24 inch loose lifts and compacted by method specification utilizing a Cat CS56B Smooth Drum <br />roller <br />See Hwy 67 embankment fill below for additional detail on materials placed. <br />Note: An Amec field representative monitored structural fill material temperatures placed within the areas of fill <br />during all shifts. Average structural fill temperatures were above 32 °F. <br />Page 1 of 6 MLE2 WE 10.05.13.doc <br />