Laserfiche WebLink
TSTool Documentation <br />4.1 Create Time Series <br />Commands <br />The Commands... Create Time Series menu inserts commands for creating new time series in memory. <br />CreateFromList(),,, <read 1( +) time series from a list of identifiers> <br />ResequenceTimeSeriesDatao ... Cresequence years to create new scenarios> <br />TS Alias = ChangeInterval()... <convert time series to one with a different interval (under development)> <br />TS Alias = Copy().,, <copy a time series> <br />TS Alias = Disaggregateo ... <disaggregate longer interval to shorter> <br />TS Alias = NewDayT5FromMonthAndDayT5()... <create daily time series from monthly total and daily pattern> <br />TS Alias = NewEnd0fMonthT5FromDayT5()... <convert daily data to end of month time series> <br />TS Alias = NewPatternTlmeSerleso ... <create and initialize a new pattern time series> <br />TS Alias = NewStatisticTimeSerieso ... <create a time series as a repeating statistic from another time series - EXPERIMENTAL> <br />TS Alias = NewStatisticYearTS()... <create a year time series using a statistic from another time series> <br />TS Alias = NewTimeSerieso ... <create and initialize a new time series> <br />TS Alias = Normalize(),,, < Normalize time series to unitless values> <br />TS Alias = RelativeDiffo ... <relative difference of time series> <br />Commands... Create Time Series Menu <br />These commands create new time series from external data (see CreateFromList ()),by using user - <br />supplied data (see NewTimeSeries O ), or by operating on existing time series. Time series created <br />from existing time series are fundamentally different from the original and cannot take its place with the <br />same identifier. For example, the data interval or identifier is different in the new time series. <br />One important difference between the commands is whether one or multiple time series are created as the <br />result of a command. For example, the TS Alias =commands create a single time series, which can <br />be referenced using the time series alias (Alias). However, other commands may create more than one <br />time series, and the identifiers for the time series are determined during the discovery phase of command <br />processing (e.g., when time series identifiers are read from a file, but the data are not). <br />57 Commands - 3 <br />