Laserfiche WebLink
Commands <br />TSTool Documentation <br />The menus for each category are discussed in the following sections. Selecting a command menu item <br />will display a command editor. The editor dialog and command syntax are described in detail in the <br />Command Reference at the end of this documentation. Menus are enabled /disabled depending on the <br />state of the application (e.g., whether time series are available). <br />Many commands allow a list of 1+ time series to be processed. The TSList command parameter is <br />available for many commands to indicate how the list of time series to be processed is determined. For <br />example, TSList =A11TS will process all available time series. Refer to the command reference for a <br />description of available parameters for a command. The standard values for the TSList parameter are <br />as follows: <br />TSList Parameter <br />Value <br />Description <br />AllMatchingTSID <br />Process all time series that match the TSID parameter (typically can <br />contain wildcards). For example, specify TSID =A* or <br />TSID =A *.* *.Month <br />A11TS <br />Process all time series. <br />Ensemble= <br />Process all time series for the ensemble identifier. <br />LastMatchingTSID <br />Process the last (previous to the current command) TSID that matches <br />the TS I D parameter. <br />SelectedTS <br />Process all time series that have been selected with <br />SelectTimeSeries ( ) commands. <br />Spec i f i edTS ID <br />Process all time series in the specified list of time series identifiers (for <br />example when used with the Add O command the AddTS ID parameter <br />is used to provide the specified identifiers). <br />The TSList parameter provides a flexible way to specify time series to be processed, and allows new <br />capabilities to be added for commands that use this parameter. <br />Commands - 2 56 <br />