Laserfiche WebLink
<br />t <br /> <br />3572 <br /> <br />I <br />t <br />I.. <br />~ <br /> <br /> <br />I' <br /> <br />The first step of the project was to establish a series of observation wells in <br />both the shallow and artesian aquifers surrounding all salvage areas of the <br />Closed Basin. The wells would monitor the effects of the project on water <br />levels of those aquifers. Many wells sllited to observe project effects were <br />already available in the shallow aquifer. Most of the observation wells were <br />drilled in the confined aquifer to assure that the project is not significantly <br />affecting the artesian. <br /> <br />Regular monitoring of the water levels yields background information on which to <br />base project operation. <br /> <br />I: <br />I'. <br />" <br /> <br />Another item of high priority was to drill and pump test wells. This involved <br />pump testing from wells constructed specifically for this purpose. The pump <br />tests collected data on aquifer characteristics. This information waS required <br />for well field design. Pump testing involves continuous pumping at a constant <br />rate over a period of several days. Observation wells surrounding the pumped <br />well are measured at the same time to catalog drawdowns. <br /> <br />J <br /> <br />In connection with this program, tests for leakage from the confined aquifer <br />were performed. These tests measure the effect on the artesian aquifer from <br />pumping the shallow aquifer. The artesian was not significantly affected by <br />pumping from the shallow aquifer. <br /> <br />I. <br />~ <br />-? <br />I: <br />I. <br />.~ <br /> <br />I: <br />~ <br />I. <br /> <br />During the spring of 1916, water quality monitoring from the observation well <br />network began. This monitoring has continued throughout preconstruct ion and <br />construction, and will continue throughout the life of the project. <br /> <br />After the pump testing and confined aquifer testing, models were constructed <br />based on the information gathered in the testing phase of the project. The <br />models provided a basis for designing the pumping capacities and spacing of <br />wells. <br /> <br />Each stage of the Closed Basin Division has been designed using data from the <br />preceding stages. These data are comr~ter modeled to determine maximum water <br />yield without excessive drawdown in the salvage area. No excessive drawdown <br />means no significant effect on the artesian aquifer; and that pumping will not <br />affect the water table in existing wells outside the salvage areas by more than <br />two feet. These effects are precluded by law. <br /> <br />I. <br /> <br />An environmental impact statement was prepared as required by the National <br />Environmental Policy Act of 1969. This impact statement presents a project <br />description and evaluation of its environmental costs and benefits. This docu- <br />ment considers the overall environment, including fish and wildlife, archeology, <br />and social effects. The existing environment and the future environment, both <br />with and without the proposal, were described. <br /> <br />I: <br /> <br />f <br />I <br /> <br />The statement was filed with the Council on Environmental Quality. During the <br />90-day review period which followed, the public was invited to comment on the <br />proposed project. Public hearings were held in Saguache and.Alamosa. The draft <br />and final environmental impact statements, the public comments on them, and the <br />Bureau's responses are public documents. <br /> <br />I <br /> <br />-4- <br /> <br />I <br />