Laserfiche WebLink
<br />. <br /> <br />. <br /> <br />. <br /> <br />OJJj32 <br /> <br />Model 5040 Specifications: <br />Size: 8 in. x 12 in. x 7 in. <br />Weight: 7 lbs without battery. 11.8 lbs with battery <br />Battery: 4 amp-hour, 12 VOC, 4.8 lbs. <br />Standby current: 40 microamps <br />Transmission current: VHF, 8 watts, 2 amps nominal <br />Automatic transmitter regulator: Standard <br />Input connectors: Amphenol male for sensor inputs <br />BNC female for antenna <br />Amphenol female for solar panel or AC charger <br />Sensor input signals: 2 digital, SPOT switch contacts (form C) <br />Transmitter code: ASCII or Binary <br />Transmission time: Less than 0.25 second per sensor <br /> <br />5050P TIPPING BUCKET RAIN GAGE: The 5050P tipping bucket measures rainfall <br />in one millimeter increments. As each additional millimeter is measured, <br />the bucket tips. A magnetically operated sealed reed switch provides a <br />reliable SPOT digital signal to the transmitter for each tip. <br /> <br />Anodized aluminum and stainless steel are used to fabricate the tipping <br />bucket gage. These materials are strong, light weight, and corrosion <br />resistant. The stainless steel bucket is silver soldered and helium arc <br />welded at critical points for superior strength. A polyester plastic <br />coating completely seals the tipping bucket. <br /> <br />Model 5050P Specifications <br />Measurement range~ Unlimited <br />Calibration: 1 mm/tip <br />Sensitivity: 1 mm <br />Resolution: 1 mm <br />Accuracy' +/- 3% at 0-150 mm/hr <br />Electrical output: SPOT switch closure, form C <br />Power required- None <br />Materials: Stainless steel, aluminum, PVC <br />Protection: Anodized aluminum, polyester coating <br />Temperature Range: -40 to ,,80 deg C <br />Size: 11.375 in. x 6.25 in. 6.5 in. <br />Weight: 2 lbs <br /> <br />5050ANT OMNI ANTENNA: The raingage assembly is supplied with a 3 db gain <br />omni..directional antenna and 15 feet of RG-8 coaxial cable. The antenna is <br />mounted on the standpipe assembly and positioned approximately 12 feet <br />above ground level. <br />