Laserfiche WebLink
<br />I <br />I <br />l <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br /> <br />Section IC - ENGINEERING DATA <br /> <br />IC.1. GENERAL <br /> <br />A. This Section covers the submittal and review of Shop Drawings, Samples and <br />Operation and Maintenance Manuals. Refer to General Conditions for basic require- <br />ments and responsibilities. <br /> <br />IC.2. SUBMITTAL REOUIREMENTS <br /> <br />A. Submit Shop Drawings, Samples, Operation and Maintenance Manuals and other <br />submittals as required by individual specification sections in accordance with the <br />accepted schedule of Shop Drawing Submissions. <br />1. Engineer will not accept Shop Drawings or other submittals from anyone but <br />Contractor. <br /> <br />B. Do not submit operation and maintenance data with Shop Drawings unless so specified <br />or required by Engineer to determine if equipment will comply with the Contract <br />Documents. <br /> <br />C. Identify in writing all deviations of submittal from Contract Documents. <br /> <br />D. Unless otherwise specified, make all submittals in groups containing all associated <br />items to insure that information is available for checking each item when it is <br />reviewed. Partial submittals may be rejected as not complying with the Contract <br />DQcuments. <br /> <br />E. Submit the information identified by the code symbol in the individual specification <br />sections or, if not so identified, submit the appropriate information outlined below <br />required to define each item proposed to be furnished. The information to be <br />submitted for each code symbol is defined as follows: <br /> <br />DATA REFERENCE SYMBOlS AND DESCRIPTIONS <br /> <br />Symbol <br />A <br /> <br />Descriotion <br />Letters of Certification of Compliance on materials, equipment, etc. <br /> <br />B <br /> <br />Samples <br /> <br />C <br /> <br />Final Certified drawings showing outline dimensions, foundation layout or mounting <br />information, and other pertinent dimensions. <br /> <br />D <br /> <br />Field erection instructions, assembly drawings and/or diagrams detail reference drawings <br />lists, and lists of erection details. <br /> <br />E <br /> <br />Shop detail drawings showing individual subassemblies and fabricated pieces with <br />material specifications and other applicable data. <br /> <br />IC-I <br />92-024 <br />