Laserfiche WebLink
<br />001007 <br /> <br />2. A 2 page memorandum describing the State Mod GUI perfoffilance on a PC and <br />potential enhancements. <br /> <br />3. Enhanced StateMod GUI as mutually agreed upon by the State and the Consultant in <br />writing. <br /> <br />Task 25 Enhance and Convert the Consumptive Use Model CRDSS-CO to a <br />Personal Computer <br /> <br />Re.\f)()l1sihilitl,: RTi <br /> <br />Ohjecli\'e. Ellhance and convert the CROSS CU model and GUI III rUIl 011 a personal <br />computcr under Willdows 95. <br /> <br />fl1/rodllCliol1 The consumptive use model, CRDSS-CU. is a FORTRAN program thaI <br />currently operates on a workstation in two modes; from a command line and from a <br />graphical user interface. The CRDSS-CU model runs on a PC in DOS from the <br />command lille. The CRDSS-CU GUI does not currently run on a PC nor \Vas it <br />developed usillg a portable GUI builder. Rather it was constructed for a workstation to <br />operate as part of the Visual Data Browser. The CRDSS-CU model has the capability to <br />estimate consumptive use using either the Modified Blaney Criddle or Penman-Monteith <br />approach if appropriate data is provided. The CRDSS-CU model is structured to provide <br />basin wide results. With the enhancements described herein, the CRDSS-CU model will <br />provide the type of calculations and reports commonly associated with a water transfer <br />evaluation. <br /> <br />Approach: <br /> <br />25.1. Evaluate Phase "CRDSS-CU Evaluate and document in a 4-6 page <br />memorandum potential enhancements to the CRDSS-CU model de\'e1oped in Phase <br />II. Potential revisions to the program to include the following: <br /> <br />. Separate from the visual data browser. <br /> <br />. Read an ASCII file of acreage values provided by an ArcView query. <br /> <br />. Separate the different data needs associated with the Modified Blaney <br />Criddle and Penman-Monteith. <br /> <br />. Include a response file which allows the user to direct input from files with <br />different names or directories similar to StateMod. <br /> <br />. Include a log file which documents key assumptions such as when a <br />default crop mix or climate station is assigned. <br /> <br />. Include logic which provides the functionality required for a water transfer <br />evaluation. <br /> <br />. Allow time series data to be provided in a matrix (StateMod) format. <br /> <br />c: I wlcrd sslscopelph III blscope. doc <br /> <br />21\ 9/97 - 65 <br />