Laserfiche WebLink
<br />I ~ <br /> <br />~.. <br /> <br />000270 <br /> <br />I~ <br /> <br />During this investigative phase, communication will be maintained <br />between the states and the General Contractor so that each state's data <br />gathering capability is factored into the General Contractor's work <br />on Task B-8.2. The end result of this phase will be an energy balance/ <br />forecast specification which the General Contractor wi 11 present to <br />the states. This specification will state what data is required from <br />each state, what assumptions are to be made in gathering the data, and <br />in what form the data should be presented to the General Contractor. <br /> <br />Upon review of the specification, each of the states will decide <br />how the requirements within the specification are to be satisfied. <br />Each state can elect to gather the data on its own or permit the <br />data gathering to revert to the General Contractor, Each state will <br />notify the General Contractor of its decision so that the actual work <br />can begin promptly. <br /> <br />Since much of the energy research is associated with the projection <br />of time profiles, the states must have estimating techniques available <br />or they must develop such techniques for use in the High Plains study. <br />Careful attention will be given to the assumptions made in developing <br />and using these techniques so they are compatible with the assumptions <br />provided by the General Contractor in the specification. <br /> <br />Following the identification or development of the estimating <br />techniques, the states will use these techniques to project the required <br />time profi 1 es. The states wi 11 then compi 1 e these data as descri bed <br />in the specifications and forward them to the General Contractor for <br />review. Prior 'to final use of these data, the General Contractor will <br />review them and request modifications as necessary. <br /> <br />Potential tasks are: <br /> <br />A-2.l Identify and review state energy data sources <br /> <br />A-2.2 State review of energy data specifications <br /> <br />A-2.3 Determine method of satisfying the specification <br />with the General Contractor <br /> <br />A-2.4 Identify/develop method of projecting energy data <br />time profi 1 es <br /> <br />A-2.5 Project energy data profiles as required by the <br />speci fi cati on <br /> <br />OUTPUT TO: <br /> <br />A-2.5 Compile data. and forward to the General Contractor <br /> <br />As directed by the energy balance/forecast specifications, <br />outputs from each state will consist of time projections <br />for energy supply, production, and utilization; employment <br />