Laserfiche WebLink
<br /> ADDENDUM NUMBER 2 <br /> ADDITIVE BID ITEM NUMBER 1 <br /> AREA <br />Item Articles of Service ~ <br />1.* The proposed flight plan, including: <br /> a. An approximate data and time of day <br /> the project will be flown, <br /> b. The flight height (above mean <br /> ground elevation). <br /> c. A map showing ground control <br /> layout, flight lines, and locations of <br /> permanent control markers. <br /> d. The cost of flying and photography. $ <br />2. Set up to three permanent control markers <br /> (see III K) for vertical and horizontal <br /> control. The exact number of markers to be <br /> set will depend on the number of acceptable <br /> existing markers that can be recovered by <br /> the Contractor. Monuments shall be paneled <br /> prior to the aerial photography. $ <br />3. Establish vertical elevations and horizontal <br /> coordinates for existing permanent <br /> monuments located within the project area <br /> and in good condition. $ <br />4.* Provide two sets of black and white 9" x 9" <br /> contract prints on Kodak Medium-Weight <br /> Poly-Contact Rapid RC Paper (NIM/W) or <br /> its equivalent as approved by the CWCB. $ <br />5* Provide a photographic index map of contact <br /> prints on reproducible mylar and two sets of <br /> black and white prints of the index map. $ <br />