Laserfiche WebLink
<br />3 <br /> <br />-- <br /> <br />1.3 Types of Structures <br /> <br />The type of structure is an important consideration in the application of floodpl'Oofing <br />measures. Four basic types of structures can be identified: residential, commercial, industrial, <br />and mobile homes. Differentation between the type of structures is based upon occupancy, <br />structural integrity, and costs justified for flood proofing each, The following discussion is <br />directed toward the building and floodproofing of new structures, <br /> <br />In general, the only practical method of floodproofing new residential structures is to <br />elevate the structure above the BFE. Other methods of flood proofing should only be <br />employed when there are no other alternatives. Residential structures typically do not have <br />the structural integrity to resist hydrostatic forces and flood proofing measures are costly <br />when the structure is located below the base flood, Another major concern is the uncertainty <br />with respect to the occupant's safety, The Federal Emergency Management Agency (FEMA) <br />requires enactment of ordinances that require new residential structures to have the lowest <br />floor elevation (including the basement) at or above the BFE. <br /> <br />Commercial structures are not significantly different from residential structures when con. <br />sidering applicability of flood proofing measures, Small commercial businesses may not be <br />able to justify costs and may not always have the personnel on hand at times when flood. <br />proofing measures need to be implemented. Also, due to the use of these types of structures <br />by the general public, an adequate flood.warning system must exist to enable timely eva. <br />cuation, Commercial structures are considered non. residential by FEMA. <br /> <br />Due to the capital investment often associated with industrial.type structures, it is much <br />easier to justify the cost of flood proofing. Also, industrial structures generally have the struc. <br />tural capability to resist hydrostatic forces, Industrial plants that provide public and utility ser. <br />vices need to operate and be accessible continually. Again, industrial structures are <br />considered as non-residential by FEMA. <br /> <br />Mobile homes are considered separate because they are highly susceptible to flood damage <br />and require special anchoring to keep them secure when located below the BFE. Further dis, <br />cussion of mobile homes can be found in Chapter XIV. <br /> <br />When evaluating the level of a structure in relation to the BFE for either residential or non. <br />residential structures, the lowest level of the structure, includrng the basement, must be con. <br />sidered. Pictorial examples of different types of structures as defined in FEMA's Flood <br />Insurance Manual are shown in the figures on the next few pages. <br />