Laserfiche WebLink
<br />In case of conflict between the DRAWINGS and SPECIFICATIONS, the <br />SPECIFICATIONS shall govern. Figure dimensions on DRAWINGS <br />shall govern over scale dimensions, and detailed DRAWINGS shall <br />govern over general DRAWINGS. <br /> <br />10.02 SPECIFICATIONS DESIGNATIONS. Whenever reference is made in the <br />CONTRACT DOCUMENTS to standard specifications, methods of <br />testing materials, codes, practices and requirements, it shall <br />be understood that the latest edition or revision in effect as <br />of the date of the bid openi ng shall govern unl ess a specifi c <br />revision is referred to. <br /> <br />10.03 "APPROVED EQUAL" CLAUSE. Whenever a specifi c materi al, <br />equ i pment, process, or product is referred to by a propri etary <br />name, brand name or by the name of its manufacturer, it shall be <br />understood that such des i gnat ion is further qual ifi ed by the <br />phase "or approved equal", whether or not such phase actually <br />appears with the material, equipment, process or product being <br />specified. Such specification is not intended to limit the <br />material and equipment selection process but rather to indicate <br />a standard of quality and capability which will be acceptable. <br /> <br />10.04 OWNERSHIP OF DRAWINGS AND SPECIFICATIONS. All drawings and <br />specifications are the property of the OWNER but the CONTRACTOR <br />will be permitted to keep a single copy of each drawing and <br />specification as necessary to maintain a contract record file. <br /> <br />10.05 DRAWINGS AND SPECIFICATIONS ISSUED TO THE CONTRACTOR. Upon <br />receiving Notice of Award the CONTRACTOR may request as many <br />additional copies of the DRAWINGS and SPECIFICATIONS as the <br />CONTRACTOR may desire. These will normally be available at the <br />place where the BID DOCUMENTS were issued. The first six sets of <br />these DRAWINGS and SPECIFICATIONS will be used at no cost to the <br />CONTRACTOR, but the CONTRACTOR must purchase all sets of <br />DRAWINGS and SPECIFICATIONS in excess of six. Whether or not <br />the CONTRACTOR is eligible for a refund of the deposit made for <br />the original BID DOCUMENTS is stated in the advertisement of <br />INVITATION FOR BIDS, and the fact that the Bidder was awarded a <br />CONTRACT does not change those requirements. <br /> <br />Of the six sets of DRAWINGS and SPECIFICATIONS issued free to <br />the CONTRACTOR, one set must be maintained in good condition at <br />the work site for the purpose of recording "as-built" conditions <br />as necessary to develop an "As Constructed Record". On this set <br />of DRAWl NGS and SPEC IF ICATIONS, the CONTRACTOR wi 11 record all <br />changes and deviations in a neat and legible manner. Any <br />deviation between the DRAWINGS and SPECIFICATIONS and the WORK <br />actually done, no matter how insignificant, must be recorded. <br />Of special concern is that all underground utility structures <br />encountered in the process of doing the WORK be correctly <br />located on the drawi ngs. When the WORK is compl eted, the <br />CONTRACTOR shall deliver this single set of DRAWINGS and <br /> <br />IV-9 <br /> <br />(1667-3/90) <br />