Laserfiche WebLink
<br />12 <br /> <br />Right encroachments from variables "ENCFP", or <br />"STENCR", or MELENCR" (X3.3, or X3.6, or X3.7), <br />or methods one and two from "ET" card. <br /> <br />13 <br /> <br />Left effective flow area as indicated by <br />variable "ELLEA" (X3.8). Plots levee from <br />normal bank elevation to "ELLEA" elevation. <br /> <br />14 <br /> <br />Right effecti ve flow area as indicated by <br />variable "ELREA" (X3.9). Plots levee from <br />normal bank e1ev:.tfon to "ELREA" elevation. <br /> <br />Changing the default symbol and line options requires entering <br />either the command: <br /> <br />(a) "PLOT" followed by a set of cards, one card per curve, <br />indicating the curve number, xvar, yvar, the symbol, the <br />line, the symbol size, and the curve label. Entering a <br />"NULL" for both symbol and line options eliminates that <br />curve from the plot. <br /> <br />(b) "CURVE" followed by any combination of the commands: <br /> <br />"SVMBOL", "FLINE", or "CHISZE". <br /> <br />C. Profile Specific Options. <br />Several options are very specific to profile plotting including <br /> <br />. <br /> <br />special treatment of scal ing parameters "XAUPI" and "'(.AUPI", "PLOT" <br />specifications to indicate symbol, line, and variable options, data <br />units and output plot controls. The profile module is structured such <br />that the first plot always generates a profile of the entire study <br />reach. <br /> <br />. <br /> <br />29 <br />