C150227 Final Report

• Applicant: South Platte Ditch Company
• Grant Type: Non-Reimbursable
• Fiscal Year ‎(i.e. 2008)‎: 2006
• Project Name: Canal Modernization and Radio Telemetry Demonstration Project
• CWCB Section: Finance
• Contract/PO #: C150227
• Grants - Doc Type: Final Deliverables

REGWRITE 4498,22999
REM set starting address in log buffer
REGWRITE 4497,7100
REM first time through flag =0
REGWRITE 4496,0
REM expansion /future register use
REM possible # of minutes between
REM for this prog, 4495 is number
REM updates.
REGWRITE 4495,20
REM master A -E tail pointers
REGWRITE 4494,REGREAD(4499)
REGWRITE 4493,REGREAD(4499)
REGWRITE 4492,REGREAD(4499)
REGWRITE 4491,REGREAD(4499)
REGWRITE 4490,REGREAD(4499)
updates
of secs between
REM initialize setup registers
REM set analog inputs mode: (0= voltage, 1= current)
REM CD100 requires setting current mode via jumpers
REM on left side of pcb.
REM Jumpers must be installed for current mode (default)
REM and removed for voltage mode.
REM analog channel 1 is bottom most jumper (nearest
REM terminals) and chan 6 is top most.
REGWRITE 4819,3
REM set analog inputs scaling:
REM 0= 0- 20ma /0 -5v, 1= 4- 20ma /1 -5v
REM Analog Channel- All AI2 AI3 AI4 AI5 AI6
REM Binary Value -- 1 2 4 8 16 32
REGWRITE 4820,3
REM * initialize program floating point operating regs
REM NOTE: these values are set for 2 flumes, flume 1 first
REM set sensor slope register values
REGWRITE 7033,0.002817
REGWRITE 7034,0.001221
REM set sensor offset register values
REGWRITE 7037,0.0049
REGWRITE 7038,0
REM set sensor calibration factors
REGWRITE 7039, -5.9
REGWRITE 7040,1
REM set multiplier
REGWRITE 7041,20.021
REGWRITE 7042,0
REM set correction
REGWRITE 7043,0
REGWRITE 7044,0
(sensor 1 K1, sensor 2 K1)
(sensor 1 K2, sensor 2 K2)
REM set exponent (sensor 1 U1, sensor 2 U1)
REGWRITE 7045,1.5876
23