C150227 Final Report

• Applicant: South Platte Ditch Company
• Grant Type: Non-Reimbursable
• Fiscal Year ‎(i.e. 2008)‎: 2006
• Project Name: Canal Modernization and Radio Telemetry Demonstration Project
• CWCB Section: Finance
• Contract/PO #: C150227
• Grants - Doc Type: Final Deliverables

REM G = sensor 2 flow
REM H = sensor 2 accumulated daily volume(acre feet)
REM I = charging (solar panel) voltage
REM J = battery voltage
REM K = temperature in deg C
REM L = previous day's accumulated volume present at
REM midnight only.
REM previous day's total volume is reset at midnight
REM initialize program integer operating registers
REM set alarm enable- 0 =off, 1 =on
REM NOTE: integer alarm regs not used yet 5 -9 -08.
REM only alarm type is depth and value in 7070, 7071
REM enables alarm.
REGWRITE 4100,0
REM set alarm type- 0= depth, 1 =flow
REGWRITE 4101,0
REM reserved
REGWRITE 4102,0
REM set sensor warmup /enable- 0 =off, 1 to xx= warmup
REM number of seconds in register
REGWRITE 4103,3
REM set datalogging enable- 0= disable, 1= enable
REGWRITE 4104,1
REM
REGWRITE
REM
REGWRITE
REM
REGWRITE
REM
REGWRITE
REM
REGWRITE
set slave id into alarm tx reg
4110,REGREAD(4811)
set internal alarm status off
4111,0
set alarm ack status
4112,0
set charge rate timer
4113,60
set charge status to
4114,0
to off
in minutes
initial to charge value
REM log data register table:
REM 4490 Master E tail pointer
REM 4491 Master D tail pointer
REM 4492 Master C tail pointer
REM 4493 Master B tail pointer
REM 4494 Master A tail pointer
REM 4495 undefined
REM 4496 undefined
REM 4497 Buffer starting address
REM 4498 Buffer ending address
REM 4499 Head pointer
REM start address (head pointer)
REGWRITE 4499,7100
REM set highest address in log buffer
REM NOTE that this is not 23020. regs 23000+ are
REM used for YTD volumes for past 10 years.
22