Laserfiche WebLink
<br />Task 18 -StateMod and StateMod GUI Enhancements <br />Objective: <br />To enhance the StateMod and StateMod GUI software to facilitate and streamline <br />modeling efforts, while maintaining compatibility and consistency with StateDMI and <br />other CDSS software. <br />Background: <br />The StateMod GUI allows modelers to interactively view and edit StateMod data sets. <br />The interactive features complement the batch-mode data preparation of StateDMI and <br />TSTooI. In particular, the StateMod GUI provides tools that operate on an entire dataset, <br />whereas StateDMI typically operates only on one or a few data products at a time. The <br />enhancements indicated below will maintain compatibility with current StateMod model <br />software and allow StateMod and the GUI to be used more efficiently by a wider <br />audience. <br />Assumption: <br />Documentation describing new StateMod file formats will be provided to RTi by the <br />State. If the specification is not final, RTi will help finalize the specifications via email <br />and phone correspondence before significant development starts. <br />Approach: <br />18.1 Update StateMod GUI software to utilize new StateMod file formats. The <br />following files are being modified, to allow data file creation to be sequential, <br />without updates to files during the process: <br />1. The diversion stations file (*.dds) is being split into multiple files <br />containing diversion station parametric information, efficiencies, and <br />delay table assignments. <br />2. The well stations file (*.wes) is being split into multiple files containing <br />well station parametric information, efficiencies, delay and depletion table <br />assignments. <br />3. The reservoir stations file (*.res) file is being split into multiple files <br />containing reservoir station parametric information, accounts, climate <br />station assignment, area/content/seepage, and delay table information. <br />Low-level software to read and write these files will be developed in Task 141 <br />(StateDMI). The StateMod GUI will be updated as follows: <br />The response file display will list the new separate files, while also being <br />backward compatible to read old data sets that do not use the separate <br />files. <br />2. The GUI components that display/edit the data will be updated to reflect <br />new internal data structures. <br />4 <br />