Laserfiche WebLink
^ Allow the use of multiple independent gages to fill a single dependent gage and provide <br />a summary report that compares the results produced with each independent gage. <br />^ Similar to the MSM logic that allows the process of selecting independent gages to be <br />quick, develop an automated process for filling multiple dependent gages with multiple <br />independent gages (specifically for use in filling monthly baseflows). <br />^ Add the average, wet, and dry month calculations of the "pattern fill" technique for <br />filling diversions (to replace the use of MSM and the spreadsheet analysis used in <br />previous DSS efforts). <br />^ Provide monthly regression analysis scatter plots on a month-by-month basis (currently <br />TSTooI provides a single graph for all months regardless of the regression type <br />selected)). <br />^ With both annual and monthly regression equations, provide a graph of the regression <br />equation applied to the historical dependent data period (to check how the equation <br />would predict the actual historical data). Allow the user to compare two regression <br />results on the same graph. <br />^ With both annual and monthly regression equations, provide a graph of the residuals for <br />the historical dependent data period (predicted value using regression equation - <br />historical data). Allow the user to compare two regression results on the same graph. <br />^ Provide one annual value of the correlation coefficient and one annual value of the <br />RMSE for monthly regressions so that they can be directly compared to annual <br />regressions. <br />Comments and Concerns <br />None. <br />References <br />CRDSS Section E.8, Subtask 11.10 Fill Missing Baseflow Data, David M. Frick and Mike <br />Wellborn. <br />CRDSS Section E.6, Subtask 11.5 Characterize Streamflow Data, David M. Frick and Dana <br />Moore. <br />Appendices <br />Appendix A -Step-by-Step Mixed Station Model (MSM) Use Instructions <br />Task2.doc 7 of 10 <br />