C150208 Feasibility Study

• Contract/PO #: C150208
• Contractor Name: High Line Canal Company
• Contract Type: Loan
• Water District: 17
• County: Otero
• Loan Projects - Doc Type: Feasibility Study

$225,400.00 for 400 feet of siphon
pipeline
plus 66-inch nominal diameter HOPE
elbows, for in-place straight or offset
pipeline
(minimum of 4 to 8 elbows may be
required)

$450.00 each for either 30-degree
or 45-del!ree HOPE elbows"
** Installation cost covered in above
HOPE pipe installation cost

Sub-total Cost Range for HOPE PipeJ Appurtenances Installation
$174,600.00 to $229,000.00

3) Alternate 72-inch IDside Diameter Class ill Reinforced Concrete Pipe <RCP)
With Rubber Gaskets. Drain at Low Point. and Auuurtenances

-

-

March 2005 material costs source: Precast Conceots
(Henderson. Colorado)

pipe material cost
@ $109.00 per linear foot (FOB Pueblo)
plus $400.00 per linear foot for
installation between 300' to 400'
(includes local site excavation,
foundation subgrade preparation,
bedding and backfill materials
selection/processing, placement and
compaction/densification, and 15 %
construction contingency)

Cost Range

$152,700.00 for 300 feet of sag pipeline
$203,600.00 for 400 feet of sag pipeline

plus 72-inch diameter Class ill radius pipe
bend sections, for in-place straight or
offset pipeline
(imilliiiiiiDoUio 8 mdius pipe bend
sections may be required)

$1650.00 each for any-degree RCP mdius
DWe bend section**
** Installation cost covered in above
RCP installation cost

Sub-total Cost Range for RCPI Appurtenances Installation
$159,300.00 to $216,800.00

-

-

-

-

-

-

-

-

-

4) Alternate Elliutical-shaoed 58-inch bv 91-incb (inside dimensions) Class ill
Reinforced Concrete Pine With Gaskets. Drain at Low Point. and AuuurtenanteS
(hydraulically-equivalent to 72-inch nominal diameterweIded steel pipe, RCP or
wood stave pipe (would be cost-effective to Highline Canal)

March 2005 material costs - source: Precast ConcetlIS
(Henderson. Colorado)

. pipeline material cost
@ $170.00 per linear foot (FOB Pueblo)
plus $375.00 per linear foot for
installation between 300' to 400'
(includes local site excavation,
foundation subgrade preparation,
bedding and backfill materials
selection/processing. placement, and
compaction/densification, and 15 %
construction contingency)

Cost Range

$163,500.00 for 300 feet of sag pipeline
$218,000.00 for 400 feet of sag pipeline

plus 58-inch by 91-inch Oass ill
concrete elliptical-shaped tnmsition
mdius bend sections, for in-place stmight
or offset pipeline installations (minimum
of 4 to 8 radius bend sections may be
required)

$1650.00 each for any-degree 58-inch by
91-inch transition radius Dine bend
section**
** Installation cost covered in above
elliptical concrete pipe installation

Sub-total Cost Range for Reinforced Concrete Elliptical PipeJ Ap])Ul1enances Installation
$170,100.00 to $231,200.00

Note: An order for welded steel pipe would require a 10- to 12-week manufacturer
fabrication and delivery time to Pueblo (per Northwest Pipe Company); a 3- to 4- week
time frame would be required for the HDPE manufacturer fabrication and delivery time
to Pueblo (per Mountain States Pipe & Supply) as well as for the RCP or elIiptical-
shaped reinforced concrete pipe manufacturer fabrication and delivery time to Pueblo
(per Precast Concepts).

SUB-TOTAL RANGE IN TECC

$165,300.00 to $312,000.00

-

-

-

-

-

-

-

-