Laserfiche WebLink
<br />I <br /> <br />I <br /> <br />I <br /> <br />Errors Warnings a otes for Plan: Plan 01 (Continued) <br />Warning: The velocity head has changed by more than 0.5 ft (0.15 m). This may indicate the need for <br /> additional cross sections, <br />Warning: The coiweyance ratio (upstream conveyance divided by downstream conveyance) is less than 0.7 <br /> or greater than 1.4. This may indicate the need for additional cross sections. <br />Warning: The energy loss was greater than 1.0 ft (0.3 m). between the current and previous cross section. <br /> This may indicate the need for additional cross sections. <br />Warning: During the standard step iterations. when the assumed water surface was set equal to critical depth, <br /> the calculated water surface came back below C1itical depth. This indicates that there is not a valid <br /> subcritical answer. The program defaulted to C1itical depth. <br />Location: River: minnesota Reach: 1 RS: 6852 Profile: PF 1 <br />Warning: The velocity head has changed by more than 0.5 ft (0.15 m). This may indicate the need for <br /> additional cross sections. <br />Warning: The energy loss was greater than 1.0 ft (0.3 m). between the current and previous cross section. <br /> This may indicate the need for additional cross sections, <br />Location: River: minnesota Reach: 1 RS: 6654.25" Profile: PF 1 <br />Warning: The energy equation could not be balanced within the specified number of iterations. The program <br /> used critical depth for the water surface and continued on with the calculations. <br />Warning: The energy loss was greater than 1.0 ft (0.3 m). between the current and previous cross section. <br /> This may indicate the need for additional cross sections. <br />Location: River: minnesota Reach: 1 RS: 6456.5" Profile: PF 1 <br />Warning: The energy loss was greater than 1.0 ft (0.3 m). between the current and previous cross section. <br /> This may indicate the need for additional cross sections. <br />Location: River: minnesota Reach: 1 RS: 6258.75" Profile: PF 1 <br />Warning: The energy equation could not be balanced within the specified number of iterations. The program <br /> used critical depth for the water surface and continued on with the calculations. <br />Warning: The energy loss was greater than 1.0 ft (0,3 m). between the current and previous cross section, <br /> This may indicate the need for additional cross sections. <br />Location: River: minnesota Reach: 1 RS: 6061 Profile: PF 1 <br />Warning: The energy loss was greater than 1.0 ft (0.3 m). between the current and previous cross section. <br /> This may indicate the need for additional cross sections. <br />Location: River: minnesota Reach: 1 RS: 5860.5" Profile: PF 1 <br />Warning: The energy loss was greater than 1.0 ft (0.3 m). between the current and previous cross section. <br /> This may indicate the need for additional cross sections. <br />Location: River: minnesota Reach: 1 RS: 5660.- Profile: PF 1 <br />Warning: The energy loss was greater than 1.0 ft (0,3 m), between the current and previous cross section. <br /> This may indicate the need for additional cross sections. <br />Location: River: minnesota Reach: 1 RS: 5459.5" Profile: PF 1 <br />Warning: The energy loss was greater than 1.0 ft (0,3 m). between the current and previous cross section, <br /> This may indicate the need for additional cross sections. <br />Location: River: minnesota Reach: 1 RS: 5259 Profile: PF 1 <br />Note: Hydraulic jump has occurred between this cross section and the previous upstream section. <br />Location: River: minnesota Reach: 1 RS: 5093 Profile: PF 1 Culv: Culvert #1 <br />Note: The normal depth exceeds the height of the culvert. The program assumes that the normal depth is <br /> equal to the height of the culvert. <br />Location: River: minnesota Reach: 1 RS: 5092 Profile: PF 1 <br />Warning: The cross-section end points had to be extended vertically for the computed water surface. <br />Warning: The velocity head has changed by more than 0.5 ft (0.15 m). This may indicate the need for <br /> additional cross sections. <br />Warning: The conveyance ratio (upstream conveyance divided by downstream conveyance) is less than 0.7 <br /> or greater than 1.4. This may indicate the need for additional cross sections. <br />Warning: The energy loss was greater than 1.0 ft (0.3 m). between the current and previous cross section. <br /> This may indicate the need for additional cross sections. <br />Location: River: minnesota Reach: 1 RS: 4983 Profile: PF 1 <br /> <br />ndN <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br />