Laserfiche WebLink
<br />I <br /> <br />I <br /> <br />Errors Warnings and Notes for Plan: Plan 01 <br /> <br />I <br /> <br />Location: River: minnesota Reach: 1 RS: 17840 Profile: PF 1 <br />Warning: The energy equation could not be balanced within the specified number of iterations. The program <br /> used critical depth for the water surface and continued on with the calculations. <br />Warning: The energy loss was greater than 1.0 ft (0,3 m). between the current and previous cross section. <br /> This may indicate the need for additional cross sections. <br />Location: River: minnesota Reach: 1 RS: 17663.7" Profile: PF 1 <br />Warning: The velocity head has changed by more than 0.5 ft (0,15 m), This may indicate the need for <br /> additional cross sections. <br />Warning: The energy loss was greater than 1,0 ft (0.3 m). between the current and previous cross section. <br /> This may indicate the need for additional cross sections. <br />Location: River: minnesota Reach: 1 RS: 17487.5" Profile: PF 1 <br />Warning: The velocity head has changed by more than 0.5 ft (0.15 m), This may indicate the need for <br /> additional cross sections. <br />Warning: The conveyance ratio (upstream conveyance divided by downstream conveyance) is less than 0.7 <br /> or greater than 1.4, This may indicate the need for additional cross sections. <br />Note: Hydraulic jump has occurred between this cross section and the previous upstream section. <br />Location: River: minnesota Reach: 1 RS: 17311.2" Profile: PF 1 <br />Warning: The conveyance ratio (upstream conveyance divided by downstream conveyance) is less than 0.7 <br /> or greater than 1.4. This may indicate the need for additional cross sections. <br />Location: River: minnesota Reach: 1 RS: 17135 Profile: PF 1 <br />Warning: The conveyance ratio (upstream conveyance divided by downstream conveyance) is less than 0.7 <br /> or greater than 1.4. This may indicate the need for additional cross sections, <br />Location: River: minnesota Reach: 1 RS: 16869 Profile: PF 1 Culv: Culvert #3 <br />Note: Culvert critical depth exceeds the height of the culvert. <br />Note: During the supercritical calculations a hydraulic jump occurred inside of the culvert. <br />Note: The culvert inlet is submerged and the culvert flows full over part or all of its length. Therefore, the <br /> culvert inlet equations are not valid and the supercritical result has been discarded. The outlet <br /> answer will be used. <br />Location: River: minnesota Reach: 1 RS: 16847 Profile: PF 1 <br />Warning: The energy equation could not be balanced within the specified number of iterations. The program <br /> used critical depth for the water surface and continued on with the calculations. <br />Warning: The energy loss was greater than 1.0 ft (0.3 m). between the current and previous cross section. <br /> This may indicate the need for additional cross sections. <br />Warning: During the standard step iterations, when the assumed water surface was set equal to critical depth, <br /> the calculated water surface came back below critical depth. This indicates that there is not a valid <br /> subcritical answer. The program defaulted to critical depth. <br />Location: River: minnesota Reach: 1 RS: 16683.6" Profile: PF 1 <br />Warning: The velocity head has changed by more than 0.5 ft (0,15 m). This may indicate the need for <br /> additional cross sections. <br />Warning: The conveyance ratio (upstream conveyance divided by downstream conveyance) is less than 0.7 <br /> or greater than 1.4. This may indicate the need for additional cross sections. <br />Waming: The energy loss was greater than 1.0 ft (0.3 m). between the current and previous cross section. <br /> This may indicate the need for additional cross sections. <br />Location: River: minnesota Reach: 1 RS: 16520.3" Profile: PF 1 <br />Warning: The energy loss was greater than 1.0 ft (0.3 m). between the current and previous cross section. <br /> This may indicate the need for additional cross sections. <br />Location: River: minnesota Reach: 1 RS: 16357 Profile: PF 1 <br />Warning: The velocity head has changed by more than 0,5 ft (0.15 m), This may indicate the need for <br /> additional cross sections. <br />Warning: The energy loss was greater than 1.0 ft (0.3 m). between the current and previous cross section. <br /> This may indicate the need for additional cross sections. <br />Location: River: minnesota Reach: 1 RS: 16145,3" Profile: PF 1 <br />Warning: The energy equation could not be balanced within the specified number of iterations, The program <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br /> <br />I <br />