Laserfiche WebLink
<br />sectors are based upon demand area averages. The data provided in the <br /> <br />1983 Regional Water Study indicated that most of the water suppliers <br /> <br />could not separate two or more of these sectors. Although it was <br /> <br />possible and justifiable to derive "systemwide" averages for these <br /> <br />customer classes, further adjustment is not supported by the data. <br /> <br /> <br />While the use factor model might underpredict or overpredict demand by <br /> <br />these sectors for individual districts, the use factors correctly <br /> <br />represent SFF. MF, E, and P sector demand for the EIS demand area. <br /> <br />Sufficient data were available to allow consideration of single- <br />family metered water use (SFM) on an individual district basis. The <br />average water usage of 478 gallons per household per day for the EIS <br />demand area is a weighted composite of the individual water districts <br />which responded to DRCOG' s 1983 Regional Water Study Questionnaire. <br />The use factor model modifies the SFM use factor for each district by <br />adjusting for lot size, income, household size, and marginal price of <br />water. When a supplier did not provide information on water use, the <br />use factors were applied as if they had. Population, housing, and SFM <br />sector socioeconomic characteristics were projected for the service <br />area involved and the use factors were applied to the projections. <br /> <br />The COE has developed separate use factors for the SFM and P <br /> <br />sectors for the city and county of Denver and the suburbs. In deriving <br /> <br /> <br />the separate use factors, OWD data were used to calculate demand in <br /> <br />gallons per unit per day for the city and county of Denver. The <br /> <br /> <br />suburban use factor was computed to be the number which when combined <br /> <br />in a weighted average with the Denver use factor would yield the <br /> <br /> <br />previously used combined use factor. Future demand projections will be <br /> <br />calculated using the new use factors which are presented in table 2. <br /> <br />19 <br />