Laserfiche WebLink
2.05.4 -RECLAMATION PLAN <br />,~ ABANDONMENT OF `THE MINE:. REMOVAL OF SURFACE FACILITIES <br />The following mine facilities and structures will be removed or demolished: <br />Mine portal facilities., shown on Map. King I-007, will be torn down. The <br />foundations, steel, and other non-woody material will be pushed against the <br />highwalls and covered by at least 4 feet of fill and plant growth medium as <br />detailed elsewhere in this section. Woody material will be moved to the burn <br />pit near the lower pump house and burned. Miscellaneous trash and debris <br />(assume 150 cubic yards) accumulated during final reclamation will be burned <br />and buried. <br />• The Tipple Building is only a "snow shed", of pole barn construction, <br />essentially atin-covered wooden roof held up by several steel posts. This 60' ~ <br />65' structure has no walls and is 1 foot thick. <br />• The Tipple Shed measures 16' x 44' x 8', and is a wooden post and beam <br />construction. <br />• The Main Conveyor Portal Shed is very similar in construction to the 1Yppiq <br />Shed. This shed measures about 12' x 20' x 8'. <br />• The Tipple Bin measures about 15' x 25' 50' and is entirely constructed of <br />steel beams and bolted plate. <br />• The Mine Fan is a prefabricated coal mine ventilation fan assembly made up <br />of three main parts. The fan is basically a 6' diameter skid mounted cylinder <br />about 16' long which unbolts from the fan housing. The fan housing is a 5' <br />diameter metal culvert which extends for several feet underground to connect <br />the fan to the mine workings. Adjacent to the fan housing is the escape <br />air-lock unit which is a steel box with two sets of airlock doors. This steel box <br />measures about 6' x 8' x 8'. <br />• The Main Conveyor is elevated about 7' high and extends about 40 feet from <br />the mine portal, discharging into the Tipple Bins area. The structure <br />measures about 5' wide by 4' high. <br />• The Stacker Conveyor extends about 300' from the Tipple Bins area to <br />Stacker Tower #1, supported about midway by Stacker Tower #2. <br />• Stacker Tower #1 is a 50' tall conveyor support tower of steel beam <br />construction. It measures 16' x 16' at the base and tapers to 10' x 10' at the <br />top, with a total volume of 8900 ft3. <br />• Stacker Tower #2 is a 25' tall conveyor support tower of steel beam <br />construction. It measures 8.5' x 16' at the base and tapers to 8.5' x 5.5' at the <br />top, with a total volume of 2284 ft3. <br />National King Coal, LLC King I Mine <br />Section 2.05.4 <br />Page 1 February, 2007 <br />