GENERAL41000 - Laserfiche WebLink

Home Browse Search

Document Imaging CD/DVD ~(l ~2EQUEST FORM & INSTRUCTIONS Request for a DMG document images on the (lowing DMG permit file(s): 3 /~ d~rryy q d 2.- 1) ~ b~ Z) / ' ~OOD-QQ~ 3) `~~g3 -(i0~4} ~ l O~ _' (~ ttag 7!~ EGX -'LC'.t ~ ~Cr CcNlt ~ a-d~PC't:4cl~ ~` 1~ / "-D5~ The DMG document images can be coped to ei er a CD or a DVD. Please check one below an return this '~~? form with your payment to DMG. If a Cp is requested and the permit is too large for a CD, you will be called. Please allgvrup to 5 business y~ receipt of this signed document for your CD or DVD to be available CD @ $5.00 per disk ~ DVD @ $20.00 per disk Please check if you want a espy of the QuickView installation instmctions. Computer requirements to use the DMG document imaging CD (or DVD): 1. A program called QuickV lees will be espied to the CD and must be installed on your computer in order to use a DMG imaging CD the fast time. Future use of this or other imaging CD's does not require a new installation of the software. 2. The CD or DVD that you purchase must be in the D: drive. A DVD drive will read a CD or DVD. 3. The CD will contain files with the .tif extension. There needs to be an image viewing application for .8f files on your computer that will handle single and multi-page documents. On a Windows XP computer, the default viewing programs are called "Windows Picture and Fax Viewer" or "Paint" and they do not work with QuickView. The Imaging Viewer that comes with pre-Windows XP computers does work. DMG has determined that a progrun called "IrfanView", which can be downloaded from IrfanView.com, does work with QuickView. After downloading "h-fanView", it needs to be configured as your default .tif viewer. DMG does not support or endorse this softwaze and the licensing and registration are the user's responsibility. There are many other programs that work as weft, such as "Imaging Preview" and "Imaging for Windows". Instructions• 1. Insert the CD into your computer. 2, Allow time for the CD ro install. 3. Eject the CD from the computer. 4. Reinsert the CD into the computer. 5. You aze ready to view the Permit Files. NOTE: A program called QuickView Autonm, which runs the QuickView setup program, has also been copied to this CD. If the Autorun program does NOT work, you will need to manually install the QuickView program. Instructions for manually installing QuickView aze available upon request with the CD or can be viewed at www.minin¢.state.co.us. The Permit File document images can be viewed in the reception area of the DMG otlice or they can be purchased on a CD or DVD, The CD/DVD purchase cost covers the time and labor of making the CD. DMG cannot provide computer related sunaort. Disclaimer: The Colorado Division of Minerals and Geology (DMG) is not responsible and shall not be liable to the user for damages of any kind arising out of the use of data or infonnarion provided by the DMG, including the installation of the data or information, its use, or the results obtained from its use. Any data or information provided by the DMG is provided "as is" without warranty of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particulaz purpose. Data or information provided by the DMG shall be used and relied upon only at the user's sole risk, and the user agrees to indemnify and hold harmless the DMG, its officials, officers and employees from any liability arising out of the use ofthe data information provided. Customer Mailing and Contact Information: Print Name: // ((''''1/~ Uf7n~y Company: IQTCL Pi Address: ~t7~~ CRUrf~'1 R4s'IGIt U/Ky~ ~ 6~k~ r~O.G~~ Phone: ~v~ ' t' I Signature: '~/~ ~~ DMG use only CD/DVD created and Itestedrby: Date: ~^' -D