Laserfiche WebLink
Hernandez, Dan <br />From: Barbe, Henry [HBarbe@archcoal.com] <br />Sent: Wednesday, November 02, 2005 9:58 AM <br />To: rztaylor@fs.fed.us; daniel.hernandez@state.co.us <br />Subject: Minor Revision 322 Drillhales (3) <br />2005CDMGMR32 <br />2. pdf <br />Attached is a drawing showing the general location of a pad for <br />drillholes MCC anticipates drilling to determine the concentration and type of mine gases <br />and then subsequent injection of foam, water, or nitrogen and photographing the area <br />underground. MCC proposes to drill up to 3 drillholes at this location. The pad would be <br />approximately 1.75 acres. The holes would be drilled at 14 inches diameter cased with 12 <br />inch casing and then nested 7" casing to the B Seam. I am currently working on the <br />project plan that should be available by noon today. MCC proposes a rig to be placed on <br />the pad later today with drilling commencing this evening. <br />«2005CDMGMR322.pdf» <br />********** Email Disclaimer ********** <br />The information contained in this e-mail, and in any <br />accompanying documents, may constitute confidential and/or <br />legally privileged information. The information is intended only <br />for use by the designated recipient. If you are not the intended <br />recipient (or responsible for delivery of the message to the <br />intended recipient), you are hereby notified that any dissemination, <br />distribution, copying, or other use of, or taking of any action in <br />reliance on this e-mail is strictly prohibited. If you have received <br />this e-mail communication in error, please notify the sender <br />immediately and delete the message from your system. <br />