Laserfiche WebLink
Walker, Byron <br />From: Scott, Crellin (KEC) [Crellin.Scott@kennecottenergy.comj <br />Sent: Wednesday, June 30, 2004 9:00 AM <br />To: P. E. Byron G. Walker (E-mail) <br />Cc: Young, Bob (KEC) <br />Subject: Additional fnformationfor MR-64 on Colowyo Coal Mine, Permit No. 81-019 <br />Importance: High <br />Mr. Walker, <br />In addition to the information you received for MR-64, I wanted to further describe the <br />installation of the power cable and 3 inch waterline. In both cases our intent is to <br />minimize disturbance for both installations. Therefore overland installation is planned <br />with brush removal as the only preparation for laying the power cable and the waterline on <br />the surface of the ground. The brush removal corridor will be a swath equal to a dozer <br />blade width of approximately 25 feet. Incidental disturbance of the topsoil may result <br />with brush removal, but no topsoil stripping will be conducted. This type of installation <br />would then fall within the variance allowance of CDMG Rules, Section 4.05.18 (2)(a)(iii). <br />I hope this added information is useful in your approval of MR-69. If you have any <br />further questions please call me at your convenience. <br />Sincerely, <br />C. Crellin Scott <br />Sr. Environmental Engineer <br />Colowyo Coal Mine. <br />970-824-1532 <br />Crellin.Scott@kennecottenergy.com <br />CONFIDENTIAL and PROPRIETARY information of Kenne COtt Energy Company (C) 2002. A11 rights <br />reserved. This work contains information that is confidential and proprietary to Kennecott <br />Energy Company. The senders contact information is also protected by the Kennecott Energy <br />Company Data Protection Policy, and should not be circulated. Removal of this notice, use, <br />transfer, republication, disclosure and/or copying of all or part of this message, or its <br />attachments, is strictly prohibited, except with the express, written permission of <br />Kennecott Energy Company. If you have received this e-mail message in error please return <br />it and contact Crellin Scott at 970-829-1532 <br />