2024-04-30_REVISION - M2015033 ‎(14)‎

• Permit No: M2015033
• IBM Index Class Name: Revision
• Doc Date: 4/30/2024
• Doc Name Note: Exhibit D - Mining Plan
• Doc Name: Adequacy Review Response
• From: Raptor Materials LLC
• To: DRMS
• Type & Sequence: TR3
• Email Name: RDZ
• Email Name: JPL
• Media Type: D
• Archive: No

Page 1
6.4.4 EXHIBIT D — Mining Plan
The mining plan shall supply the following information, correlated with the
affected lands, map(s) and timetables:
(a) description of the method(s) of mining to be employed in each
stage of the operation as related to any surface disturbance on
affected lands;
(b) earthmoving;
(c) all water diversions and impoundments; and
(d) the size of area(s) to be worked at any one time.
(e) An approximate timetable to describe the mining operation. The
timetable is for the purpose of establishing the relationship between
mining and reclamation during the different phases of a mining
operation. An Operator/Applicant shall not be required to meet specific
dates for initiation, or completion of mining in a phase as may be
identified in the timetable. This does not exempt an
Operator/Applicant from complying with the performance standards of
Section
3.1. If the operation is intended to be an intermittent operation as
defined in Section 34-32.5-103(11)(b)7 C.R.S., the Applicant should
include in this exhibit a statement that conforms to the provisions of
Section 34-32.5-103(11)(b)7 C.R.S. Such timetable should include:
(i) an estimate of the periods of time which will be required for
the various stages or phases of the operation;
(ii) a description of the size and location of each area to be
worked during each phase; and
(iii) outlining the sequence in which each stage or phase of the
operation will be carried out. (Timetables need not be separate
and distinct from the mining plan, but may be incorporated
therein.)
(f) A map (in Exhibit C - Pre-Mining and Mining Plan Maps(s) of Affected
Lands, Subsection 6.4.3) may be used along with a narrative to
present the following information:
(i) nature, depth and thickness of the deposit to be mined and the
thickness and type of overburden to be removed (may be
marked "CONFIDENTIAL," pursuant to Paragraph 1.3(3)); and
(ii) nature of the stratum immediately beneath the material to be
mined in sedimentary deposits.
(g) Identify the primary and secondary commodities to be
mined/extracted and describe the intended use; and
(h) name and describe the intended use of all expected incidental
products to be mined/extracted by the proposed operation.
(i) Specify if explosives will be used in conjunction with the mining (or
reclamation). In consultation with the Office, the Applicant must
demonstrate pursuant to Subsection 6.5(4), Geotechnical Stability
Exhibit, that offsite areas will not be adversely affected by blasting.
RAPTOR MATERIALS, LLC. PARCEL 122— RESOURCE DEVELOPMENT PROJECT APRIL 2024
A REGULAR IMPACT[1121 CONSTRUCTION PERMIT APPLICATION-COLORADO DIVISION OF RECLAMATION,MINING&SAFETY
TECHNICAL REVISION 03