2013-04-15_PERMIT FILE - C1981038 ‎(3)‎

• Permit No: C1981038
• IBM Index Class Name: Permit File
• Doc Date: 4/15/2013
• Doc Name: RECLAIMED CONFIGURATIONS ZONES 2-A, 2-B, 2-C, 2-D, & 2-E ‎(East Mine)‎
• Section_Exhibit Name: MAP 6A-5I
• Media Type: M
• Archive: No

SECTION 2 -A
SCALE 1" = 20' H &V
NOTES, SECTION 2 -A
1. FLATTEN THE FILL OUTSLOPE TO 2HA V OR FLATTER,
2. SPREAD TOPSOIL ON THE SURFACE OF SLOPE AND REVEGETATE.
3. PLACE THE FILL IN APPROXIMATELY HORIZONTAL LAYERS NO MORE
THAN 24 INCHES IN THICKNESS AND COMPACT BY ROUTING THE
CONSTRUCTION EQUIPMENT UNIFORMLY OVER THE FILL SURFACE.
4. COMPACTED FILL SHALL HAVE A DRY DENSITY OF AT LEAST 90%
10100a:111118UN7I �TA (I] L IBMW o]g1061I VA
ORIGINAL SURFACE
7000
OPERATIONAL SURFACE / R /
(RECLAIMED)
RECLAIMED SURFACE
6950
RECLAIMED ROAD
SECTION 2 -C
SCALE 1" = 20' H &V
NOTES, SECTION 2 -C
1. PLACE BUTTRESS AGAINST THE TOE OF THE
SLOPE. SLOPE BUTTRESS OUTSLOPE AT 2HAV
OR FLATTER.
2. CLEAN REMAINING CUT OF LOOSENED ROCK.
3. REGRADE THE DRAINAGE DITCH AS NEEDED
ACCORDING TO MAP 6A -5D.
4. SPREAD TOPSOIL ON THE SURFACE OF SLOPE
AND REVEGETATE.
5. PLACE THE FILL IN APPROXIMATELY HORIZONTAL
LAYERS NO MORE THAN 24 INCHES IN THICKNESS
BY ROUTING THE CONSTRUCTION EQUIPMENT
UNIFORMLY OVER THE FILL SURFACE.
6. COMPACTED FILL SHALL HAVE A DRY DENSITY
OF AT LEAST 90% OF THE MAXIMUM DRY DENSITY.
7150
ORIGINAL SURFACE ___�
RECLAIMED SURFACE (PERMITTED)
OPERATIONAL SURFACE
7100
RECLAIMED ROAD
SECTION 2 -D
SCALE 1" = 20' H &V
NOTES, SECTION 2 -D
RECLAIMED SURFACE
AS -BUILT SURFACE (RECLAIMED)
1. PLACE BUTTRESS AGAINST THE TOE OF THE
SLOPE. SLOPE BUTTRESS OUTSLOPE AT 2HA V
OR FLATTER.
2. REGRADE THE DRAINAGE DITCH AS NEEDED
ACCORDING TO MAP 6A -5D.
3. SPREAD TOPSOIL ON THE SURFACE OF SLOPE
AND REVEGETATE.
5. PLACE THE FILL IN APPROXIMATELY HORIZONTAL
LAYERS NO MORE THAN 24 INCHES IN THICKNESS
BY ROUTING THE CONSTRUCTION EQUIPMENT
UNIFORMLY OVER THE FILL SURFACE.
6. COMPACTED FILL SHALL HAVE A DRY DENSITY
OF AT LEAST 90% OF THE MAXIMUM DRY DENSITY.
ORIGINAL SURFACE
OPERATIONAL SURFACE
AS -BUILT SURFACE (RECLAIMED)
�-- RECLAIMED ROAD
SECTION 2 -13
SCALE 1" = 20' H &V
NOTES, SECTION 2 -13
1. FLATTEN THE OUTSLOPE TO 2HA V OR FLATTER.
2. SPREAD TOPSOIL ON THE SURFACE OF SLOPE AND REVEGETATE.
7200
OPERATIONAL SURFACE
ORIGINAL SURFACE
RECLAIMED SURFACE
7150
T SURFACE
SECTION 2 -E
SCALE 1" = 20' H &V
(NOTES, SECTION 2 -E
1.IPLACE BUTTRESS AGAINST THE TOE OF THE
SLOPE. SLOPE BUTTRESS OUTSLOPE AT 2H: IV
iOR FLATTER.
2. iCLEAN REMAINING CUT OF LOOSENED ROCK.
3.IREGRADE THE DRAINAGE DITCH AS NEEDED
ACCORDING TO MAP 6A -5D.
4. SPREAD TOPSOIL ON THE SURFACE OF SLOPE
AND REVEGETATE.
5. ]PLACE THE FILL IN APPROXIMATELY HORIZONTAL
]LAYERS NO MORE THAN 24 INCHES IN THICKNESS
IBY ROUTING THE CONSTRUCTION EQUIPMENT
(UNIFORMLY OVER THE FILL SURFACE.
6.00MPACTED FILL SHALL HAVE A DRY DENSITY
OF AT LEAST 90% OF THE MAXIMUM DRY DENSITY.
ED)
r
y ,
��OEIVED
MAR 14 2p1?
Div1A n,
.Mg and Safety