Laserfiche WebLink
August 2013 <br />Table 2. Hydraulic Conductivity Testing Results <br />103- 81640A <br />Notes: —MW -2 was estimated because water levels recovered to higher levels than "static" at the beginning of the test (Secor 1998). <br />?Recovery too rapid and water displacements too small in slug tests conducted in monitoring well MW -5 for analysis. <br />3 /Recovery too slow to conduct meaningful slug test In MW -6; depth to water exceeded commonly available pressure transducer cable lengths. <br />N /A: Not Available. <br />i \10 \81640a\ 0400 \gwcharwelhnstallfield rep _ 09aug13 \reporttables_rev08O62013 docx <br />Golder <br />Associates <br />Hydraulic Conductivity <br />Hydraulic Conductivity <br />Monitoring Well <br />Test Method <br />(cm /sec) <br />(ft/day) <br />MW -1 <br />Pumping <br />9.2 x 10-7 <br />2.6 x 10 -3 <br />MW -2 1' <br />Pumping <br />4.9 x 10-10 <br />1.4 x 10-6 <br />MW -3 <br />Pumping <br />7.1 x 10 -9 <br />2.0 x 10 -5 <br />MW -4 <br />Slug (rising and falling head) <br />5.0 x 10-7 <br />1.4 x 10-3 <br />MW -5 21' <br />Slug (rising and falling head) <br />See notes <br />See notes <br />MW -6 1' <br />None <br />N/A <br />N/A <br />Wireline Packer from 55 -61 feet <br />2.3 x 10 -6 <br />6.6 x 10 -3 <br />Wireline Packer from 262 -271 feet <br />4.0 x 10 -6 <br />1.1 x 10-2 <br />MW -7 <br />Wireline Packer from 251 -271 feet <br />2.9 x 10 -6 <br />8.2 x 10 -3 <br />Notes: —MW -2 was estimated because water levels recovered to higher levels than "static" at the beginning of the test (Secor 1998). <br />?Recovery too rapid and water displacements too small in slug tests conducted in monitoring well MW -5 for analysis. <br />3 /Recovery too slow to conduct meaningful slug test In MW -6; depth to water exceeded commonly available pressure transducer cable lengths. <br />N /A: Not Available. <br />i \10 \81640a\ 0400 \gwcharwelhnstallfield rep _ 09aug13 \reporttables_rev08O62013 docx <br />Golder <br />Associates <br />