2013-08-13_HYDROLOGY - M1977348 - Laserfiche WebLink

Home Browse Search

ADZ Laboratories, Inc. 2773 Downhill Drive Steamboat Springs, CO 80487 (800) 334 -5493 Golder Associates ACZ Project ID: L12395 REPAD.15.06.05.01 Page 17 of 22 L12395 -01 WG345301 Chloride M300.0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). WG345122 Fluoride SM450OF -C RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). WG345301 Sulfate M300.0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). L12395 -02 WG345301 Chloride M300.0 - Ion Chromatography DC Sample required dilution. Non - target analyte exceeded calibration range. M300.0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). WG345122 Fluoride SM450OF -C RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). WG344918 pH SM4500H+ B ZW Method deviation. The sample was centrifuged prior to analysis due to high solid content. WG345301 Sulfate M300.0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). WG344918 Total Alkalinity SM2320B - Titration ZW Method deviation. The sample was centrifuged prior to analysis due to high solid content. L12395 -03 WG345301 Chloride M300.0 - Ion Chromatography DC Sample required dilution. Non - target analyte exceeded calibration range. M300.0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). WG345278 Fluoride SM450OF -C RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). WG344805 Residue, Filterable (TDS) @180C SM2540C ZO Concentration is based on a final residue greater than 200 Mg. WG345301 Sulfate M300.0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). L12395 -04 WG345301 Chloride M300.0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). WG345278 Fluoride SM450OF -C RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). WG344805 Residue, Filterable (TDS) @180C SM2540C ZO Concentration is based on a final residue greater than 200 Mg, WG345301 Sulfate M300.0 - Ion Chromatography DC Sample required dilution. Non - target analyte exceeded calibration range. M300.0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). L12395 -05 WG345301 Chloride M300.0 - Ion Chromatography M1 Matrix spike recovery was high, the recovery of the associated control sample (LCS or LFB) was acceptable. WG345278 Fluoride SM450OF -C RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 1 O MDL). WG344805 Residue, Filterable (TDS) @180C SM2540C ZO Concentration is based on a final residue greater than 200 Mg. WG345301 Sulfate M300.0 - Ion Chromatography DC Sample required dilution. Non - target analyte exceeded calibration range. M300.0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). REPAD.15.06.05.01 Page 17 of 22