2013-05-21_HYDROLOGY - M1977348 - Laserfiche WebLink

Home Browse Search

ADZ Laboratories, Inc. 2773 Downhill Drive Steamboat Springs, CO 80487 Golder Associates ACZ Project ID: L11197 ID WORKNUM PARAMETER METHOD QUAL DESCRIPTION 'ACZ L11197 -08 WG340820 Barium, dissolved M200 7 ICP M3 The spike recovery value is unusable since the analyte level The recovery of the associated control sample (LCS concentration in the sample is disproportionate to the spike level The recovery of the associated control sample (LCS WG341153 Chloride M300 0 - Ion Chromatography or LFB) was acceptable Sodium, dissolved M200 7 ICP M3 The spike recovery value is unusable since the analyte calibration range WG341222 concentration in the sample is disproportionate to the spike SM450OF -C RA Relative Percent Difference (RPD) was not used for data level The recovery of the associated control sample (LCS or LFB) was acceptable WG341222 Fluoride SM450OF -C RA Relative Percent Difference (RPD) was not used for data accurate evaluation (< 10x MDL) WG340929 pH validation because the sample concentration is too low for ZW Method deviation The sample was centrifuged prior to accurate evaluation (< 10x MDL) WG341153 Sulfate M300 0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data Residue, Filterable (TDS) @180C SM2540C ZO validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG340929 Total Alkalinity SM23208 - Titration RA Relative Percent Difference (RPD) was not used for data RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for validation because the sample concentration is too low for accurate evaluation (< 10x MDL) L11197 -09 WG340820 Barium, dissolved M200 7 ICP M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level The recovery of the associated control sample (LCS or LFB) was acceptable WG341153 Chloride M300 0 - Ion Chromatography DC Sample required dilution Non - target analyte exceeded calibration range WG341222 Fluoride SM450OF -C RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG340929 pH SM4500H+ B ZW Method deviation The sample was centrifuged prior to analysis due to high solid content WG340923 Residue, Filterable (TDS) @180C SM2540C ZO Concentration is based on a final residue greater than 200 mg WG341153 Sulfate M300 0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG340929 Total Alkalinity SM2320B - Titration ZW Method deviation The sample was centrifuged prior to analysis due to high solid content REPAD.15.06 05.01 Page 23 of 26