2013-05-21_HYDROLOGY - M1977348 - Laserfiche WebLink

Home Browse Search

AOZ Laboratories, Inc. 2773 Downhill Drive Steamboat Spnngs, CO 80487 (800) 334 -5493 Golder Associates ACZ Project ID: L11197 L11197 -01 WG340820 Manganese, dissolved M200 7 ICP M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level The recovery of the associated control sample (LCS or LFB) was acceptable WG341037 Chloride M300 0 - Ion Chromatography DC Sample required dilution Non - target analyte exceeded calibration range WG341070 Fluoride SM450OF -C RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG340929 pH SM4500H+ B ZW Method deviation The sample was centrifuged prior to analysis due to high solid content WG340923 Residue, Filterable (TDS) @180C SM2540C ZO Concentration is based on a final residue greater than 200 mg WG340929 Total Alkalinity SM2320B - Titration RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 1 Ox MDL) SM2320B - Titration ZW Method deviation The sample was centrifuged prior to analysis due to high solid content L11197 -02 WG340820 Manganese, dissolved M200 7 ICP M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level The recovery of the associated control sample (LCS or LFB) was acceptable WG341070 Fluoride SM450OF -C RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG340929 pH SM4500H+ B ZW Method deviation The sample was centrifuged prior to analysis due to high solid content WG340923 Residue, Filterable (TDS) @180C SM2540C ZO Concentration is based on a final residue greater than 200 mg WG341037 Sulfate M300 0 - Ion Chromatography DC Sample required dilution Non - target analyte exceeded calibration range WG340929 Total Alkalinity SM2320B - Titration RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL) SM2320B - Titration ZW Method deviation The sample was centrifuged prior to analysis due to high solid content L11197 -03 WG340820 Barium, dissolved M200 7 ICP M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level The recovery of the associated control sample (LCS or LFB) was acceptable WG341070 Fluoride SM450OF -C RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG341153 Sulfate M300 0 - Ion Chromatography DC Sample required dilution Non - target analyte exceeded calibration range M300 0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG340929 Total Alkalinity SM2320B - Titration RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL) REPAID 15.06 05.01 Page 20 of 26