2013-04-15_REVISION - C1996083 ‎(3)‎

• Permit No: C1996083
• IBM Index Class Name: REVISION
• Doc Date: 4/15/2013
• Doc Name: Proposed Revised Pages
• From: J.E. Stover & Associates, Inc
• To: DRMS
• Type & Sequence: TR78
• Email Name: SLB
• Media Type: D
• Archive: No

2.05.3
Bowie -2 MR -123 approved six gob vent holes to be drilled in 2011. They
are GVB -B11A, B11B, B12A, B12B, B12C & B13A. MR -124 approved
two additional holes to be drilled in 2011. They are GVB -B11C and B12D.
GVB -B12A, B12B, B12C & B13A were drilled in 2012.
Bowie -2 TR -73 approved ten gob vent holes and three exploration holes.
They are GVB -B12E, GVB -B13B, GVB -B13C, GVB- B13D,GVB -B13E,
GVB -B14A, GVB -B14B, GVB -B14C, GVB -B14D, GVB -B14E, SS -6
SS -7 and 2012 -1. GVB -B12E, GVB -B13B, GVB -B13C, GVB- B13D,GVB-
B13E, GVB -B14A, SS -7 and 2012 -1 were drilled in 2012.
Bowie -2 MR -133 approved the 2012 installation of four utility holes to be
installed north of the large ventilation fan above the D -Seam portals. MR-
133 also approved the 2012 installation of GVB -13F.
Bowie -2 MR -134 approved the installation of an emergency vent hole into
the B13 tailgate bleeder entry. Due to technical difficulties this vent hole
was not installed. The drill pad for the emergency hole was constructed.
Bowie -2 MR -135 approved the 2013 installation of an emergency gob
vent hole for the B13 panel (GVB- B13C -1).
Bowie -2 TR -78 approved the 2013 installation of six gob vent holes and
one exploration hole. They are GVB -B14F, GVB -B15A, GVB -B15B, GVB -
B15C, GVB -B15D, GVB -B16A and exploration hole SS -8.
TR -78 2.05 - 49 - 04/13