Laserfiche WebLink
Source of Sand and Gravel— Weld County, Colorado, Southern Part <br />Map symbol and soil name <br />Pct. of <br />map unit <br />Potential as a source of gravel <br />Potential as a source of sand <br />Rating class and limiting <br />features <br />Value <br />Rating class and limiting <br />features <br />Value <br />3— Aquolls and Aquents, <br />gravelly substratum <br />Aquolls <br />55 <br />Poor <br />Fair <br />Bottom layer <br />0.00 <br />Thickest layer <br />0.00 <br />Thickest layer <br />0.00 <br />Bottom layer <br />0.63 <br />:Aquerits;,gravellysubstratum <br />30 <br />Poor <br />Fair; <br />} <br />Thirst la <br />000 <br />Thlckest,la "er <br />Y. ... <br />. 0.01 <br />Bottar i'layer <br />0.00 <br />Bottom layer 7' • <br />-:.'0,43 <br />10— Bankard sandy loam, 0 to <br />3 percent slopes <br />Bankard <br />85 <br />Poor <br />Fair <br />Bottom layer <br />0.00 <br />Thickest layer <br />0.04 <br />Thickest layer <br />0.00 <br />Bottom layer <br />0.42 <br />46 —Olney fine sandy loam, 0 to <br />1 percent slopes <br />Olney <br />85 <br />Poor <br />Poor <br />Bottom layer <br />0.00 <br />Bottom layer <br />0.00 <br />Thickest layer <br />0.00 <br />Thickest layer <br />0.00 <br />50 —Otero sandy loam, 0 to 1 <br />percent slopes <br />Otero <br />85 <br />Poor <br />Fair <br />Bottom layer <br />0.00 <br />Bottom layer <br />0.00 <br />Thickest layer <br />0.00 <br />Thickest layer <br />0.03 <br />51 —Otero sandy loam, 1 to 3 <br />percent slopes <br />Otero <br />85 <br />Poor <br />Fair <br />Bottom layer <br />0.00 <br />Bottom layer <br />0.00 <br />Thickest layer <br />0.00 <br />Thickest layer <br />0.03 <br />Custom Soil Resource Report <br />Government ordinances and regulations that restrict certain land uses or impose <br />specific design criteria were not considered in preparing the information in this table. <br />Local ordinances and regulations should be considered in planning, in site selection, <br />and in design. <br />Report— Source of Sand and Gravel (Buckien Pit 11/2012) <br />[Onsite investigation may be needed to validate the interpretations in this table and to <br />confirm the identity of the soil on a given site. The numbers in the value columns range <br />from 0.00 to 0.99. The larger the value, the greater the likelihood that the bottom layer <br />or thickest layer of the soil is a source of sand or gravel] <br />22 <br />