My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
2012-12-27_REPORT - M1980244 (17)
DRMS
>
Day Forward
>
Report
>
Minerals
>
M1980244
>
2012-12-27_REPORT - M1980244 (17)
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/24/2016 5:11:41 PM
Creation date
1/8/2013 12:22:20 PM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
M1980244
IBM Index Class Name
REPORT
Doc Date
12/27/2012
Doc Name
QA Mon. & Test Results, Ph. 5 Berm Mod.-Apend. E Specs.
From
CC&V
To
DRMS
Email Name
TC1
Media Type
D
Archive
No
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
77
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
SECTION 02711.0 CORRUGATED STEEL PIPE <br />PART 1: GENERAL <br />1.01 RELATED SECTIONS <br />Refer to the following Sections for related work: <br />Section 02200.0 - Earthworks <br />Section 02271.0 - Rip Rap <br />Section 03300.0 - Cast -in -Place Concrete <br />1.02 SUBMITTALS <br />A. CONTRACTOR shall abide by all qualification and submittal requirements. <br />1.04 QUALITY ASSURANCE <br />ame0 <br />B. CONTRACTOR shall provide product data including Manufacturer's technical data and <br />specifications sufficient to allow evaluation by MANAGER. <br />1.03 TOLERANCES <br />Corrugated Steel Pipe (CSP) shall be placed to the lines and elevations shown on the DRAWINGS, with no <br />sags or humps exceeding 5 percent slope change as approved by MANAGER. <br />A. All work shall be constructed, monitored, and tested in accordance with the requirements of the CQA <br />Plan. <br />B. Any work found unsatisfactory or any work disturbed by subsequent operations before acceptance is <br />granted shall be corrected by CONTRACTOR, at no additional cost to CC &V. <br />PART 2: PRODUCTS <br />2.01 MATERIALS <br />A. Corrugated Steel Pipe: <br />1. All CSP 48 inches in diameter and smaller shall be 16 gage galvanized, and all CSP larger <br />than 48 inches in diameter shall be 12 gage galvanized, or equivalent, as approved by <br />MANAGER and CERTIFYING ENGINEER <br />2. Galvanized sheet for the manufacture of the CSP shall be produced in accordance with <br />ASTM A444 or AASHTO M -218 with a coating weight of 2.00 ounces per square foot of <br />sheet (total both sides). <br />Section 02711 Page 1 of 2 September 3, 2008 <br />Corrugated Steel Pipe Revision 1 <br />S: \Projects \1125E CCV CQA \I - Tech Specs \02711 r1 doc <br />
The URL can be used to link to this page
Your browser does not support the video tag.