2012-12-27_REPORT - M1980244 ‎(16)‎

• Permit No: M1980244
• IBM Index Class Name: REPORT
• Doc Date: 12/27/2012
• Doc Name: QA Mon. & Test Results, Ph. 5 Berm Mod.- Cover to Append E, Specs.
• From: CC&V
• To: DRMS
• Email Name: TC1
• Media Type: D
• Archive: No

SCHEMATIC OF UNTESTED
a. FTB = FILM TEAR BOND
SPECIMEN
b. ACCEPTANCE OF AD -WLD BREAKS
OUTER AREA
MAY DEPEND ON WHETHER TEST
BEAD /
VALUES MEET A MINIMUM
- BUFFED AREA
SPECIFICATION VALUE NOT ON
CLASSIFICATION AS A FTB OR
NON -FTB BREAK.
HOT TACK (DELAMINATED)
LOCUS -OF
BREAK
TYPES OF BREAKS
BREAK CODE
DESCRIPTION CLASSIFICATION°
FAILURE IN ADHESION. SPECIMENS MAY
ALSO DELAMINATE UNDER THE BEAD AND
AD1
BREAK THROUGH THE THIN DCTRUDED NON -FTB
MATERIAL IN THE OUTER AREA.
AD2
FAJLURE IN ADHESION. NON—FTB
J
BREAK THROUGH THE FILLET. �S
OFF- CENTER BEAD
THROUGH THE FILLET RANGE FROM
AD -WLD
SHEETToTONBREAKS
TOP THROUGH THEE b
NON -FTB
FILLET AFTER SOME ADHESION FAILURE
BETWEEN THE FILLET AND THE BOTTOM
SHEET.
SEI
BREAKS AT SEAM EDGE IN THE BOTTOM FTB
SHEET. SPECIMENS MAY BREAK
�--I
C�
ANYWHERE FROM THE BEAD /OUTER AREA
EDGE TO THE OUTER AREA/BUFFED AREA
EDGE. (APPLICABLE TO SHEAR ONLY)
Q
SE2
BREAKS AT SEAM EDGE IN THE TOP FTB
SHEET. SPECIMENS MAY BREAK
ANYWHERE FROM THE BEAD /OUTER AREA
EDGE TO THE OUTER AREA/BUFFED AREA
EDGE.
SE3
FTB
BREAKS AT SEAM EDGE IN THE BOTTOM
SHEET. (APPLICABLE TO PEEL ONLY)
BREAKS IN THE BOTTOM SHEETING. A 'B'
BRK1
IN PARENTHESES FOLLOWING THE CODE FTB
MEANS THE SPECIMEN BROKE IN THE
BUFFED AREA (APPLICABLE TO SHEAR
ONLY)
BRK2
BREAKS IN THE TOP SHEETING. A 'B' IN FTB
PARENTHESES FOLLOWING THE CODE
MEANS THE SPECIMEN BROKE IN THE
BUFFED AREA
SBETWEEN
AD -BRK
SOME ADHESIONFAILURE TIER FTB
FILLET AND THE BOTTOM SHEET.
(APPLICABLE TO PEEL ONLY)
Q
HT
BREAK AT THE EDGE OF THE HOT TACK NO TEST
FOR SPECIMENS WHICH COULD NOT BE
DELAMINATED IN THE HOT TACK.
NOT TO SCALE