Laserfiche WebLink
MSDS CODE AND NAME <br />DATE ISSUED <br />DATE PRINTED <br />COMPANY <br />Periods of exposure to high temperatures should be minimized. Water contamination should be avoided. <br />8. EXPOSURE CONTROLSIPERSONAL PROTECTION <br />Protective Equipment (Type) <br />Eye/Face Protection: <br />Safety glasses, chemical type goggles, or face shield recommended to prevent eye contact. <br />Skin Protection: <br />Workers should wash exposed skin several times daily with soap and water. Soiled work clothing should be laundered or <br />dry- cleaned. <br />Respiratory Protection: <br />Airborne concentrations should be kept to lowest levels possible. If vapor, mist or dust is generated and the occupational <br />exposure limit of the product, or any component of the product, is exceeded, use appropriate NIOSH or MSHA approved air <br />purifying or air supplied respirator after determining the airborne concentration of the contaminant. Air supplied respirators <br />should always be worn when airborne concentration of the contaminant or oxygen content is unknown. <br />Ventilation: <br />Local exhaust ventilation recommended if generating vapor, dust, or mist. If exhaust ventilation is not available or inadequate, <br />use MSHA or NIOSH approved respirator as appropriate. <br />Exposure Limit for the Total Product: <br />None established for product. <br />9. PHYSICAL AND CHEMICAL PROPERTIES <br />Appearance: <br />Pale liquid <br />Odor: <br />Slight <br />Boiling Point (degrees C): <br />Not determined. <br />Melting/Freezing Point (degrees C): <br />5 (41 °F) <br />Specific Gravity (water=1): <br />1.06 <br />pH: <br />7 <br />Vapor Pressure: <br /><1 mmHg at 20 °C (68 °F) <br />Viscosity: <br />110 cSt at 37.7 °C (100 °F) <br />VOC Content: <br /><1% by ASTM D 2369 <br />Vapor Density (Air =1): <br />>1 <br />: N95 SURFONIC N -95 <br />: 01/18/2007 <br />: 01/18/2007 <br />: HUNTSMAN <br />4 <br />