Laserfiche WebLink
• 2.05.6(6) <br />The currently approved mine plan (Map 9A 12- 13 -94) provides for <br />mining in Section 16, 17 and 20. Panels 19 -23 are located in <br />Section 20. Panels 24 -30 are located in Section 17 and the SW /4 of <br />Section 16. Panels 31 -38 are located in NW /4 of Section 16. As <br />indicated above, the subsidence control plan for these panels is to <br />restrict mining to areas where the anticipated extent of subsidence <br />is well away from any of the structures or renewable resource lands <br />presented on Table 15. <br />In order to confirm that the subsidence control plan is effective, <br />the Operator will perform a visual inspection of the area that <br />could be effected by subsidence in June of each year. The <br />inspections will occur prior to retreat mining and will continue <br />for two years after retreat mining has occurred. These visual <br />inspections will be applicable to Panels 19 -23, 24 -30 and 31 -38. <br />The purpose of the visual inspections is to determine if subsidence <br />has caused material damage or has reduced the value or reasonably <br />foreseeable use of the surface lands. If any such damage is noted <br />then the provisions of Rule 4.20.3(2) shall apply. <br />The Operator will also perform limited subsidence monument <br />monitoring over these panels. Refer to Exhibit 22 for details of <br />• the subsidence monitoring program. <br />• <br />rn -022 2.05 -63e New 07 -19 -95 <br />