1998-09-11_GENERAL DOCUMENTS - C1981017

Home Browse Search

19.0 EQUIPMENT RENTAL 19.1 DESCRIPTION This specification covers the furnishing and operation of equipment for other supplemental earthwork as directed by the PROJECT MANAGER. 19.2 EQUIPMENT All equipment shall be of the type and equipped as specified in the Special Conditions and on the Invitation and Bid. Mounted or attached equipment shall be that customarily manufactured for the respective size of equipment being offered. Size will be determined by maximum flywheel horsepower ratings at sea level and are the minimum size that shall be furnished and operated. Equipment must be in good operating condition and must be maintained in good operating condition by the CONTRACTOR throughout the life of the contract. The PROJECT MANAGER shall be the sole judge of whether equipment is or is not in "good operating condition". The number of hours indicated in the Special Conditions and on the Invitation and Bid Sheet are estimated. It is impossible to determine in advance the actual number of hours that the equipment will be required to be used, or to guarantee that any equipment rental will be necessary. Calculations for FHP Adjustments Equipment of any size above the minimum flywheel horsepower may be furnished subject to the approval of the PROJECT MANAGER. In order to evaluate the bids for various sizes of equipment proposed to be furnished by the bidders, the unit price inserted in the bid must be adjusted. The bidder may figure the unit price to insert in the Invitation and Bid by doing the following computation for the applicable bid item: (Rate you want per hour) X(Requested FHP) = Price on Bid Schedule (The FHP of your machine) EXAMPLE: If the desired unit rate to be received is$70.00/hour for a 215 FHP bulldozer and the minimum FHP requested is 140, then multiply$70.00 x 140/215 = $45.50 per hour. Use that calculated amount ($45.50 in the example) as the unit price on the Invitation and 14