Laserfiche WebLink
4 (FORM 2 - Public filing) <br />11. Describe proposed surface excavation or other land disturbance, including roads, pits, trenches, waste piles, drill pads and <br />collar areas of underground workings, ponds, etc... <br />Samples for assay and metallurgical work will be taken from existing open pit. This will be <br />accomplished by digging pits, cuts and trenches in the bottom and lower benches of the <br />existing open pit. <br />12. Proposed Disturbance (approximate) Describe the proposed drilling to be conducted, including anticipated number of holes, <br />diameter, depth, location, etc... Submit additional pages if necessary: <br />A. Drill Pads: Quantity Average Width (ft) Average Length (ft) <br />B. Drill Holes: Quantity Depth (ft) Diameter (in) <br />C. Mud Pits: Quantity Average Width (ft) Average Length (ft) <br />Average Depth (ft) <br />Described proposed underground work, including reopening of old workings, advancement of adits or shafts, <br />trenches, pits, cuts, rock dumps, or other types of disturbance, describe type, quantity and general dimensions: <br />Existing open adits located on east side of current open pit will be sampled. <br />Dimensions of workings unknown. Adits will be closed by placing large rocks inside <br />openings when work completed. <br />F. Other Disturbances (please describe): <br />Pits, trenches and cuts in the existing open pit will be made for assay and metallurgical <br />study. <br />G. Indicate Chemicals and Fuels used or stored on site. List type, quantity and method to store. <br />None <br />F. New Road(s): Length (ft) Width (ft) <br />Significantly Upgraded Road(s) Length (ft) Width (ft) <br />Are culverts or other crossings proposed? If so, please describe: <br />