Laserfiche WebLink
level set the Maximum. Levels have been about the same during 1988 <br /> and 1989 , somewhat higher than in the previous two years. <br /> Sutey Refuse Pile, Station #GW-1 <br /> Sampling problems prevented lab analysis during the first <br /> test period. <br /> Depth in November set the Maximum, andthe June level was also <br /> fairly close. <br /> November sampling indicated Iron, Sulfate and TDS at or near the <br /> Mean. <br /> SAR was below the Mean, down from the level of the previous fall , <br /> which set a maximum. <br /> Warehouse Station #6 <br /> Depth set a Maximum in October, although it was not far from the <br /> Mean, and depth in July was at the Mean. <br /> Iron was slightly higher than Mean during July. <br /> Sulfate was substantially below the Mean during both July and <br /> October. <br /> NA set a Maximum level in October. <br /> The Carbonate (CaCO3 ) level in October was the first reading above <br /> zero, and set the Maximum. <br /> TDS was below the mean during July, slightly above the Mean during <br /> October. <br /> Tunnel Refuse Pile, Station #11 <br /> The July Iron level set a Maximum. <br /> Sulfate levels were lower than the Mean, and the October level set <br /> a Minimum. <br /> Washplant, Station #9 <br /> Depth was at the Mean during July and October. <br /> 6 <br />