Laserfiche WebLink
A. Provide plant name and seeding rate <br />7 (FORM 2 - Public filing) <br />12. List the seed mixture to be used in the re- establishment of vegetation. See the attached seed mixture calculation to obtain <br />PLS /acre. For assistance with formulating seed mixtures and rates, contact the local NRCS if on private land, BLM /USFS if <br />on public land or State Land Board if on state land. <br />Plant Name <br />San Luis Slender Wheatgrass <br />Sodar Streambank Wheatgrass <br />Mountain Brome <br />Fireweed <br />Seeding Rate (PLS /acre) <br />4.40 <br />2.30 <br />3.90 <br />0.25 <br />B. Describe the method for seed bed preparation, and application method for grass /forb seeding: <br />Compacted areas will be loosened as necessary by ripping or discing and left in a roughened <br />conaition prior to topson replacement. i-oiiowing graaing activities, the area will oe scaritiea to <br />50% each nitrogen /phosphate) may be applied at a rate of approximately 100 pounds per <br />acre to the re- spread topsoil on the drill pads and roads. Seeding will be done by broadcasting <br />... • • _.I <br />Service. Seeding will be conducted in late fall and or early spring to take advantage of <br />moisture availability. <br />V. TERMS AND CONDITIONS FOR PROSPECTING OPERATIONS: <br />3. Reclamation measures shall be fulfilled in a timely manner and completed within five (5) years of completion of prospecting <br />activities. <br />4. The prospecting operations described in this Notice will be conducted in such a manner as to minimize surface disturbances. <br />In addition to the measures required in Rule 5, precautions to be taken include: <br />A. Confinement of operations to areas near existing roads or trails, where practicable. Existing roads which are to remain as <br />permanent roads after prospecting activities are completed shall be left in a condition equal to or better than the pre - <br />prospecting condition; <br />B. Drilling shall be conducted in such a way as to prevent cuttings and fluids from directly entering any dry or flowing <br />stream channel. Drill cuttings must be spread to a depth no greater than one -half (1/2) inch or buried in an approved <br />disposal pit; <br />