Laserfiche WebLink
Figure 6-3 <br /> Key to Figures 1 through 6 for <br /> Phase I Sampling at Nucla Mine, November, 1986 <br /> 1. Drill hole numbers are recorded on the horizontal axis. The <br /> following code was used: 1 = 1C, 2 = 2C, 3 = 3C, 4 = 4C, 5 = 695E, <br /> 6 = 697E and- 7 = 775E. <br /> 2. Parameter concentrations are recorded on the vertical axis. <br /> 3. Undefined abbreviations include OVB - overburden and INB - <br /> interburden. <br /> 4. shading indicates excessive concentrations. <br /> 5. shading indicates deficiency concentrations. <br /> 6. The following parameter units apply: <br /> percent - Saturation percentage, clay and sand <br /> mmhos/cm - Electrical conductivity <br /> ppm - molybdenum, mercury, boron, copper, lead, zinc, <br /> nickel , manganese, nitrogen, phosphorous, <br /> and potassium <br /> tons of calcium - Acid base potential <br /> carbonate required <br /> per acre furrow slice <br /> 6-26 Revised 11/01/86 <br />