2012-02-28_REVISION - M1980244 (82)

Home Browse Search

4.0 INDIVIDUAL DESCRIPTIONS OF FACILITIES AT CC &V OPERATIONS Individual chemical storage and use areas within the CC &V mine site are described in this section. The descriptions of bulk storage areas are organized by chemical category and location. Individual oil storage facilities descriptions follow the detailed requirements of 40 CFR Part 112 in terms of quantity stored /used, potential spill volume, spill prevention and control procedures, spill countermeasures, security, visual inspections, integrity testing, and conformance with other laws or regulations. Appendix C provides an inventory of oil containing products stored and used at the CC &V mine site. Individual process reagents, explosive agents, refinery wastes, lime, and laboratory chemical descriptions follow a slightly different outline for facility descriptions, although many of the same elements as for oil products do apply. The categories of chemicals described in the following sections include: • Petroleum Products • Ammonium Nitrate, Emulsion, and ANFO • Process Reagents for Beneficiation • Lime • Laboratory Chemicals 4.1 Petroleum -Based Products (fuel, lubricants) and Antifreeze Fuels, oils, and antifreeze are stored in tanks, totes, and drums in several locations on the property. Refer to Figures 2, 4, 5 and 6 for referenced locations of bulk storage areas. • Ironclad Shop/Warehouse - used oil, lubricants, and hydraulic oil are stored in above ground tanks in an interior area constructed to contain the products; antifreeze is stored in an above ground tank just outside the oil storage room; used oil and used antifreeze are stored in totes or drums on the shop floor; diesel and propane are stored in above ground tanks outside the building. • New Truck Shop — lubricants, hydraulic oil, antifreeze, and used oil are stored In above ground storage tanks in an interior area constructed to contain the products; small quantities of used oil, used antifreeze, and varieties of petroleum -based lubricants are stored in totes, large drip pans or drums, on the Truck Shop floor. • Fuel Farm - diesel fuel, gasoline, fuel additive, motor oil, antifreeze, hydraulic oil, and kerosene are stored in above ground tanks within a lined secondary containment area. • Crushers (Primary and Secondary) — hydraulic oil and lubricants are stored either on a grate - covered metal box over a concrete floor or within other secondary containment. • Mobile Fleet Maintenance anywhere on the CC &V mine site — diesel fuel, lubricants and greases, hydraulic oil, and antifreeze are hauled in a lube truck to supply mine equipment. Contractor Locations There are several areas within the boundaries of the CC &V mine site where contractors perform construction, maintenance, or related operations and where petroleum products or other environmentally sensitive materials may be stored and used. Contractor operations include: • Ironclad area — Buckley Powder's Bulk Emulsion Plant • West area - Conley Construction, Ames Construction • Cameron Pad - Conley Construction and Subcontractors (Ute Pass Sand & Gravel, Pioneer Sand & Gravel and others) • East of the VLF and SE of the Secondary Crusher — Ames Construction • Contract exploratory drilling - A.K. Drilling at Coblentz Area • Seasonal Construction - locations vary • Contract Maintenance - locations vary Spill Response Plan EMS: AGANA/CCV G: \EMS\Plans\Emergency Response Plans \SRP Plan\SRP Plan.doc Printed Copies are Uncontrolled August 17, 2010 Doc. # E -006 Revision 05 11