2012-02-28_REVISION - M1980244 ‎(78)‎

• Permit No: M1980244
• IBM Index Class Name: REVISION
• Doc Date: 2/28/2012
• Doc Name: VOL 6, Part 2: Facility & ADR Process Description & Design Basis
• From: CC&V
• To: DRMS
• Type & Sequence: AM10
• Email Name: TC1
• Media Type: D
• Archive: No

AEROFROTH® X92 Frother MSDS: 0015752 Date: 10/06/2004 Page 3 of 7
7. HANDLING AND STORAGE
HANDLING
Precautionary Measures: Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Keep away
from heat and flame.
Special Handling Statements: None
STORAGE
Areas containing this material should have fire safe practices and electrical equipment in accordance with applicable
regulations and /or guidelines. Standards are primarily based on the material's flashpoint, but may also take into
account properties such as miscibility with water or toxicity. All local and national regulations should be followed.
In the Americas, National Fire Protection Association (NFPA) 30: Flammable and Combustible Liquids Code, is a
widely used standard. NFPA 30 establishes storage conditions for the following classes of materials: Class 1
Flammable Liquids, Flashpoint <37.8 °C. Class 11 Combustible Liquids, 37.8 °C < Flashpoint <60 °C. Class Illa
Combustible Liquids, 60 °C < Flashpoint < 93 °C. Class Illb Combustible Liquids, Flashpoint > 93 °C.
Storage Temperature: Room temperature
Reason: Integrity
8. EXPOSURE CONTROLS /PERSONAL PROTECTION
Engineering Measures:
Where this material is not used in a closed system, good enclosure and local exhaust ventilation should be provided
to control exposure.
Respiratory Protection:
For operations where inhalation exposure can occur, use an approved respirator recommended by an industrial
hygienist after an evaluation of the operation. Where inhalation exposure can not occur, no respiratory protection is
required. A full facepiece respirator also provides eye and face protection.
Eye Protection:
Wear eye /face protection such as chemical splash proof goggles or face shield. Eyewash equipment and safety
shower should be provided in areas of potential exposure.
Skin Protection:
Avoid skin contact. Wear impermeable gloves and suitable protective clothing.
Additional Advice:
Food, beverages, and tobacco products should not be carried, stored, or consumed where this material is in use.
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color:
Appearance:
Odor:
Boiling Point:
Melting Point:
Vapor Pressure:
Specific Gravity:
Vapor Density:
Percent Volatile (% by wt.):
pH:
Saturation In Air (% By Vol.):
Evaporation Rate:
light to dark brown
liquid
pungent
>101 °C
Not available
Not available
0.83 - 0.92
4.5(air= 1)
50 - 100
Not applicable
Not available
Not available
213.8 °F