2012-02-28_REVISION - M1980244 (75)

Home Browse Search

ame0 • coordination of all construction activities associated with CONTRACTOR; • scheduling and coordinating construction activities with required CQA testing and activities; • overseeing the construction quality control operations performed by CONTRACTOR; • approve specific corrective measures to be implemented during construction when deviations from the SPECIFICATIONS occur; • ensure that required quality assurance testing has been performed in accordance with the CQA Plan and to the satisfaction of the CQA Monitor; and • ensure that the CQA personnel are provided with all documentation required in the CQA Plan and project SPECIFICATIONS. 2.03 DESIGN ENGINEER: In this CQA Plan, DESIGN ENGINEER refers specifically to AMEC. DESIGN ENGINEER is the individual or firm responsible for the design and preparation of the DRAWINGS and SPECIFICATIONS. DESIGN ENGINEER is responsible for approving all DESIGN and SPECIFICATION changes, modifications, or clarifications encountered during construction. 2.04 CERTIFYING ENGINEER: In this plan, CERTIFYING ENGINEER refers specifically to (To Be Determined). CERTIFYING ENGINEER is the individual or firm responsible for certifying the construction was performed in compliance with the DRAWINGS and SPECIFICATIONS. MANAGER and CERTIFYING ENGINEER shall be responsible for the resolution of all quality assurance issues. 2.05 CONSTRUCTION QUALITY ASSURANCE MONITOR: The CQA Monitor is the firm or individual responsible for performing the CQA tasks outlined in this CQA Plan. The CQA Monitor is the official CQA representative of CC &V and has the responsibility of overseeing the CQA aspects of the Work. In this CQA Plan the CQA Monitor is associated with the CERTIFYING ENGINEER, and refers specifically to (To Be Determined). The CQA Monitor has the authority to stop any aspect of the Work that is not in compliance with the CQA Plan. Work would then be resumed once corrective action has been approved by MANAGER. The specific responsibilities of the CQA Monitor include: • review the DRAWINGS, SPECIFICATIONS, and related guidance documents; • review all CONTRACTOR QC submittals and make appropriate recommendations; • obtain preconstruction and construction samples and perform material evaluation testing as required; • monitor foundation preparation activities as discussed in Section 6.02.01 and material placement as discussed in Section 6.02.02; • assure that testing equipment used and tests performed are conducted according to SPECIFICATIONS and industry standards; Section 01400.1 Page 2 of 10 January 14, 2011 Earthworks CQA Plan Revision 0 S \Protects \1125G Squaw Gulch Valley Leach Facililty Design \I - Tech Specs \01400 1 r0 doc