Laserfiche WebLink
PARAMETER <br />Number of <br />Analyses <br />Number of <br />Non -Detect <br />Analyses <br />Maximum <br />Value <br />Minimum <br />Value <br />Average <br />Value <br />Standard <br />Deviation <br />Median <br />Value <br />Flow, Rate Gallons /Min <br />34 <br />0 <br />1.46 <br />0 <br />0.04 <br />0.25 <br />0 <br />Oil and Grease Visual (No =0, Yes =1) <br />3 <br />0 <br />0 <br />0 <br />0 <br />0 <br />0 <br />Oxygen, Dissolved mg/L <br />1 <br />0 <br />7.5 <br />7.5 <br />7.5 <br />ND <br />ND <br />pH, Field, Standard Units <br />1 <br />0 <br />7.36 <br />7.36 <br />7.36 <br />ND <br />ND <br />Specific Conductance,Field (umhos /cm @ 25C) <br />1 <br />0 <br />1176 <br />1176 <br />1176 <br />ND <br />ND <br />Temperature, Water (Degrees Centigrade) <br />1 <br />0 <br />17.3 <br />17.3 <br />17.3 <br />ND <br />ND <br />Zinc, Dissolved (mg/I as Zn) <br />1 <br />1 <br /><0.05 <br /><0.05 <br />0.025 <br />ND <br />ND <br />TABLE 5 -14 <br />SAMPLE LOCATION: AG -2.0 <br />DRAINAGE: AREQUA GULCH <br />PERIOD OF RECORD: 2003 -2011 <br />ND = Not determined. Applicable in two cases: number of analyses = 1, or all analyses are non - detect. <br />Non - detect analyses are set at 1/2 the detection limit for average and standard deviation calculations. <br />Median calculations use the laboratory analyses with less than detection values as negative. <br />