2012-03-07_PERMIT FILE - C2010088 ‎(21)‎

• Permit No: C2010088
• IBM Index Class Name: Permit File
• Doc Date: 3/7/2012
• Doc Name: Other Permits
• Section_Exhibit Name: Exhibit 13
• Media Type: D
• Archive: No

PART
Page 4
Pernnit No. COR- 010000
A. COVERAGE UNDER THIS PERMIT (coat.)
pursuant to section 313 of SARA 111; fertilizers; pesticides; and waste products such as ashes, slag and sludge that
have the potential to be released with stormwater discharge.
6. Individual Permit Criteria
Various criteria can be used in evaluating whether or not an individual (or alternate general) permit is required instead of
this general permit. This information may come from the application, SNVMP, or additional information as requested by the
Division, and includes, but is not limited to, the following:
a. the quality of the receiving waters (e.g., the presence of downstream drinking water intakes or a high quality fishery, or
for preservation of high quality water);
b. the type of industry, including pollution potential;
c, (lie volume and type of materials handled;
d. the size of the facility;
e, evidence of noncompliance under a previous permit for the operation;
f. the use of chemicals within the stormnwater system; or
g. discharges of pollutants of concern to waters for which there is a Total Maximum Daily Load (TMDL) established.
In addition, an individual pen-nit may be required when the Division has shown or has reason to suspect that (lie stomiwater
discharge may contribute to a violation of a water quality standard.
Mobile Asphalt and Concrete Batch Plants
The Division has determined that, if adequately addressed by the facility's SWMP, the permit certification may be tied to
the plant, as opposed to the site. The perrnMtee's SWMP shall contain additional relevant information, such as the proposed
standard Best Management Practices (BMPs) which would be used at each site, etc. The penmittee must still meet the Ix
application, permit and SWMP requirements as described herein. The permittee is required to summarize the current
location and past locations of the plant for the previous year in the Annual Report. See Part I.D.I of the permit. As an
alternative, a batch plant that is dedicated to a specific construction site may instead be covered under a CDPS Constriction
Stormwater general permit certification issued to that site, provided that the site's SWMP includes adequate provisions for
tine batch plant.
B. STORMWATER MANAGEMENT PLAN - CONTENTS AND REQUIREMENTS
A Stonnwater Management Plan (SWM P) shall be developed for each facility covered by this permit. SWMPs shall include
BMPs that are selected, installed, implemented and maintained in accordance with good engineering practices. (The plan need
not be completed by a registered engineer.)
The plan shall identify potential sources of pollution which may reasonably be expected to affect the quality of stormwater
discharges associated with industrial activity from the facility. In addition, the plan shall describe and ensure the implementation
of prictiecs which are to be used to reduce the pollutants in stormwater discharges associated with industrial activity at the
facility and to assure compliance with the terms and conditions of this permit.
As a condition of this permit, facilities must implement the provisions of the SWMP required under this part. The
Division reserves the right to review the plan, and to require additional measures to prevent and control pollution as needed.
Any SVYMP prepared before June 30, 2006 that does not meet all of the requirements listed herein (especially those items
required for the site map) must be amended to conform with the SWMP requirements in this permit. Such amendments
must be completed within 60 days of the certification effective date (typically July 1, 2006).
The SWMP shall include the following items, at a minimum:
Industrial Activity Description
The plan shall provide a narrative description of the industrial activity taking place at the site.