Laserfiche WebLink
ACZ Laboratories, Inc. <br />2773 Downhill Drive Steamboat Springs, CO 80487 (800) 334 -5493 <br />Golder Associates <br />ACZ ID WORKNUM PARAMETER <br />METHOD <br />QUAL DESCRIPTION <br />L91984 - WG314825 Selenium, dissolved <br />WG314564 Chloride <br />WG314142 Fluoride <br />WG313929 Nitrate /Nitrite as N, dissolved <br />Nitrite as N, dissolved <br />WG314010 Residue, Filterable (TDS) ©180C <br />REPAD 15.06 05 01 <br />WG314564 Sulfate <br />M200.8 ICP -MS BE <br />M300.0 - Ion Chromatography RA <br />S M4500 F -C RA <br />M353.2 - Automated Cadmium RA <br />Reduction <br />M353 2 - Automated Cadmium RA <br />Reduction <br />SM2540C ZO <br />M300.0 - Ion Chromatography D1 <br />M300.0 - Ion Chromatography DC <br />Inorganic Extended <br />Qualifier Report <br />ACZ Project ID: L91984 <br />Target analyte in continuing calibration blank (CCB) at or <br />above the acceptance criteria Target analyte was not <br />detected in the sample [< MDL] <br />Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL) <br />Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />Relative Percent Difference (RPD) was not used for data <br />validation because the sample concentration is too low for <br />accurate evaluation (< 10x MDL). <br />Concentration is based on a final residue greater than 200 <br />mg <br />Sample required dilution due to matnx. <br />Sample required dilution. Non - target analyte exceeded <br />calibration range. <br />Page 23 of 36 <br />